SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Demonstrate an understanding of basic marine systems installation and operation under close supervision 
SAQA US ID UNIT STANDARD TITLE
123601  Demonstrate an understanding of basic marine systems installation and operation under close supervision 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
People who are pursuing a career in basic boat building require the skills, values and knowledge reflected in this unit standard. Learners who achieve this unit standard will demonstrate a fundamental knowledge base of small craft manufacturing and contribute to the boat building sector in installing marine systems under close supervision.

A person credited with this unit standard is able to:
  • Interpret and apply drawings.
  • Demonstrate an understanding and apply basic plumbing principles to marine systems.
  • Demonstrate an understanding and apply basic mechanical principles to marine propulsion and steering systems.
  • Demonstrate an understanding and apply basic direct current (DC) and alternating current (AC) electrical principles to marine systems.
  • Demonstrate a basic understanding of airconditioning, refrigeration and ventilation systems as relevant to their use on small craft. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in:
  • Communication and Mathematical Literacy at NQF Level 2. 

  • UNIT STANDARD RANGE 
    The range covers the role and purpose of the boat building sector. It includes the practices, culture, quality standards, legal framework, main activities and expectations of clients in the boat building sector. The applied competencies in this unit standards are relevant to wood, metal and composite construction materials. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate an understanding and apply basic plumbing principles to marine systems. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The basics of plumbing hydraulics are understood and applied in terms of permissible friction losses in relation to correct selection of piping. 

    ASSESSMENT CRITERION 2 
    Basic pipe selection and sizing are interpreted to match the right components and to ensure the pressure and flow of water in accordance with specifications. 

    ASSESSMENT CRITERION 3 
    Basic plumbing equipment and material are identified and selected for utilisation in the installation process according to specifications. 
    ASSESSMENT CRITERION RANGE 
    Basic plumbing equipment and material include but not limited to valves, skin fittings and spigots, level gauges, pumps, piping materials, clamping methods, water heaters.
     

    ASSESSMENT CRITERION 4 
    Tankage, water quality and pollution prevention aspects are understood and applied to reflect the different fluid storage requirements and their implications in accordance with marine regulations. 
    ASSESSMENT CRITERION RANGE 
    Tankage, water quality and pollution prevention include but not limited to tankage material, types, venting systems, materials of construction, black water, grey water, fresh water, salt water, fuel.
     

    ASSESSMENT CRITERION 5 
    Basic fault finding on plumbing system components and materials is undertaken and defects corrected to meet quality standards and design criteria. 

    SPECIFIC OUTCOME 2 
    Demonstrate an understanding and apply basic mechanical principles to marine propulsion and steering systems. 
    OUTCOME RANGE 
    Marine propulsion and steering systems include but not limited to engines, rudders, drive trains, exhaust systems, cooling systems. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The basics of marine propulsion and steering systems are understood and applied in terms of the required performance criteria of the small craft in accordance with the design specifications. 

    ASSESSMENT CRITERION 2 
    Basic installation requirements are explained to reflect an understanding of the preparation work for the installation process required for marine propulsion and steering systems. 

    ASSESSMENT CRITERION 3 
    Basic marine propulsion and steering system components are identified for utilisation in the installation process according to specifications. 
    ASSESSMENT CRITERION RANGE 
    Basic marine propulsion and steering system components include but not limited to engines, cutlass bearings, drive shafts, gear boxes, stern glands, "P" brackets, propellers, rudders, rudder shafts, key ways, locking systems, tiller, quadrants.
     

    ASSESSMENT CRITERION 4 
    The basic principles of cooling and exhaust systems are explained in terms of their types and functions on a small craft. 

    ASSESSMENT CRITERION 5 
    Basic fault finding on marine propulsion and steering systems is undertaken and defects corrected to meet quality standards and design criteria. 

    SPECIFIC OUTCOME 3 
    Demonstrate an understanding and apply basic direct current (DC) and alternating current (AC) electrical principles to marine systems. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The basics direct current (DC) and alternating current (AC) electrical principles are understood and applied in terms of the impact on the performance and reliability of other equipment on a small craft. 

    ASSESSMENT CRITERION 2 
    The basics direct current (DC) and alternating current (AC) electrical principles are understood and applied in terms in accordance with marine safety specifications. 

    ASSESSMENT CRITERION 3 
    Basic electrical components are identified for utilisation in the installation process according to specifications. 
    ASSESSMENT CRITERION RANGE 
    Basic electrical components include but not limited to alternators, batteries, battery charges, battery switches, switch panels, electric wires and cabling, inverters, isolation transformers.
     

    ASSESSMENT CRITERION 4 
    The relationship between electricity and corrosion prevention in the marine environment is explained to reflect its impact on small craft. 

    ASSESSMENT CRITERION 5 
    Basic fault finding on marine electrical systems is undertaken and defects corrected to meet safety standards and design criteria. 

    SPECIFIC OUTCOME 4 
    Demonstrate a basic understanding of airconditioning, refrigeration and ventilation systems as relevant to their use on small craft. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The basics of airconditioning, refrigeration and ventilation systems are understood and applied in terms of the required performance criteria of the small craft in accordance with the design specifications. 

    ASSESSMENT CRITERION 2 
    Basic installation requirements are explained to reflect an understanding of the preparation work for the installation process required for airconditioning, refrigeration and ventilation systems. 

    ASSESSMENT CRITERION 3 
    Basic airconditioning, refrigeration and ventilation system components are identified for utilisation in the installation process according to specifications. 
    ASSESSMENT CRITERION RANGE 
    Basic airconditioning, refrigeration and ventilation system components include but not limited to refrigeration compressors, air grills and ducting, insulation materials, refrigerant cooling methods.
     

    ASSESSMENT CRITERION 4 
    The basic principles of airconditioning, refrigeration and ventilation systems are explained in terms of their types and functions on a small craft. 

    ASSESSMENT CRITERION 5 
    Basic fault finding on airconditioning, refrigeration and ventilation systems is undertaken and defects corrected to meet quality standards and design criteria. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this Qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments at exit points of the Qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual Unit Standards as well as the integrated competence described in the Qualification.
  • Anyone wishing to be assessed against this Qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names, functions and locations of:
  • Various clubs, functional owners associations, regulatory bodies.
  • Classification bodies.

    Purpose of processes and procedures of:
  • The purpose of optical processes.
  • The activities in planning and timing processes.

    Attributes, properties, characteristics related to:
  • Properties of different craft.
  • Different categories of craft.

    Cause and effect, implications of:
  • Area of operation.

    Categories of things, processes, concepts:
  • Boat building concepts.

    Procedures and techniques:
  • Boat building techniques, material.

    Regulations, legislation, agreements, policies:
  • Organisational policies.
  • Relevant regulations regulating bodies.
  • Occupational, Health and Safety Act.
  • Environmental Act.

    Theory - rules, laws, principles:
  • Boat building terminology.
  • Uses of boating concepts and principles.
  • Organisational culture.

    Relationships, systems:
  • Between the boat manufacturer and commercial and leisure activities.
  • Between the retailer and client. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identifying and solving problems in which responses display that responsible decisions using critical and creative thinking have been made when:
  • Distinguish between the correct and incorrect material for the best product.
  • Make right decision on best use of small craft.
  • Understanding and applying organisational policies and procedures.
  • Understanding the relationships. 

  • UNIT STANDARD CCFO WORKING 
    Working effectively with others as a member of a team, group, organisation, and community during:
  • Support and assistance activities in the manufacturing process.
  • Liaison with clients.
  • The establishment of internal and external relationships. 

  • UNIT STANDARD CCFO ORGANISING 
    Organising and managing oneself and one's activities responsibly and effectively when:
  • Following processes, procedures and organisational protocols. 

  • UNIT STANDARD CCFO COLLECTING 
    Collecting, analysing, organising and critically evaluating information to better understand and explain:
  • Interpret boating history and impact on current boating environment. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicating effectively using visual, mathematical and/or language skills in the modes of oral and/or written persuasion when:
  • Complying with the regulatory framework.
  • Applying the policies and procedures.
  • Providing descriptions, explaining, defining. 

  • UNIT STANDARD CCFO SCIENCE 
    Using science and technology effectively and critically, showing responsibility towards the environment and health of others when:
  • Use technology to make calculation and take measurements.
  • Sourcing information on the standards, specifications, policies and procedures. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrating an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation when:
  • Between the boat manufacturer and client requirements. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Supplementary Information:

    Notes to Assessors

    Assessors should keep the following general principles in mind when designing and conducting assessments against this unit standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes. Do not focus the assessment activities on each assessment criterion. Ensure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • Ensure evidence is gathered across the range as expressed under the title of unit standards. Specific range statements under individual outcomes or assessment criteria are illustrations, from which learning programme developers can select. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the learner is able to perform in the real situation.
  • The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance can be reproduced.
  • All assessments should be conducted in line with the following well-documented principles: assessment should be appropriate, fair, manageable, integrated into work or learning, valid, and consistent. Evidence should be authentic, sufficient, and current.
  • Assessment of this standard can be carried out through continuous assessment throughout the course of study and specific performances assessed.
  • Embedded knowledge must be integrated with the Specific Outcomes of the Unit Standard and Critical Cross Field Outcomes.

    Definitions:
  • Small Craft includes wood, polycomposite or metal boats under 30 meters in length and constructed primarily for leisure purposes.
  • All boating terminology are used in accordance with the "Boating Basic Glossary of Terms". 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  50543   National Certificate: Small Craft Construction  Level 3  NQF Level 03  Passed the End Date -
    Status was "Registered" 
    2009-08-31  Was MERSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.