SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Test and repair an engine lubrication system 
SAQA US ID UNIT STANDARD TITLE
244057  Test and repair an engine lubrication system 
ORIGINATOR
SGB Vehicle Maintenance 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for people in the automotive industry who are expected to test and repair components on an engine lubrication system.

People credited with this unit standard are able to:
  • Demonstrate knowledge of lubrication.
  • Understand the functions of lubrication system components.
  • Test the engine lubricating system and locate any faults.
  • Repair lubrication system faults.
  • Conduct post repair activities. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
  • Communication and Mathematical Literacy at NQF Level 2.
  • The ability to work safely in an automotive workshop.
  • The ability to use hand tools correctly.
  • The ability to identify materials and fit locking devices in vehicles. 

  • UNIT STANDARD RANGE 
    The following scope and context applies to the whole unit standard:
  • Reference to suitable tools and equipment means industry approved tools and equipment that are recognised within the industry as being the most suited to complete the task to a professional and competent manner with due regard to safe working practices.
  • The practical assessment evidence must be obtained from commercial jobs in the workplace under normal workplace conditions.
  • Engines include multi cylinder 2 and 4 stroke diesel or petrol engines with an engine capacity of not less than 1300cc.

    Specific range statements are provided in the body of the unit standard where they apply to particular specific outcomes or assessment criteria. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of lubrication. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The basic principles of lubrication are explained in terms of viscosity and lubricity. 

    ASSESSMENT CRITERION 2 
    The differences between oils are explained in terms of their chemical stability and tolerance to additives. 

    ASSESSMENT CRITERION 3 
    The benefits of grease are explained in terms of its properties and conditions under which grease is preferred to oil. 

    ASSESSMENT CRITERION 4 
    Additives for oil and grease are described in terms of their functions and benefits. 

    ASSESSMENT CRITERION 5 
    The use of solid lubricants is explained in terms of specific applications and functions. 

    ASSESSMENT CRITERION 6 
    Characteristics of synthetic lubricants are explained in terms of their lubricating qualities. 

    SPECIFIC OUTCOME 2 
    Understand the functions of lubrication system components. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The location of each lubrication system component is identified in relation to other components in the lubrication process. 

    ASSESSMENT CRITERION 2 
    The function of each component is explained in terms of its contribution to reducing friction between moving parts in an engine. 

    ASSESSMENT CRITERION 3 
    The main components of the lubrication system are identified in terms of their purpose and function. 

    ASSESSMENT CRITERION 4 
    The importance of each component is explained in accordance with overall engine lubrication. 

    SPECIFIC OUTCOME 3 
    Test the engine lubrication system and locate any faults. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Safe working practices are observed throughout the task. 
    ASSESSMENT CRITERION RANGE 
    Personal safety, safety of others, equipment and engine safety.
     

    ASSESSMENT CRITERION 2 
    Suitable tools and equipment are selected to enable the lubrication system to be adequately tested. 

    ASSESSMENT CRITERION 3 
    Tools and equipment are used in accordance with their design. 

    ASSESSMENT CRITERION 4 
    Lubrication system faults are identified and isolated in accordance with workplace and engine manufacturer requirements. 
    ASSESSMENT CRITERION RANGE 
    Blockages, cooling systems, corrosion, erosion, contamination, leaks.
     

    ASSESSMENT CRITERION 5 
    Parts that cannot be feasibly repaired are identified and replacement parts are sourced in accordance with company specific procurement procedures. 

    SPECIFIC OUTCOME 4 
    Repair lubrication system faults. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Safe working practices are observed throughout the task. 
    ASSESSMENT CRITERION RANGE 
    Personal safety, safety of others, equipment and engine safety.
     

    ASSESSMENT CRITERION 2 
    Suitable tools and equipment are selected to enable lubrication system faults to be repaired. 

    ASSESSMENT CRITERION 3 
    Tools and equipment are used in accordance with their design. 

    ASSESSMENT CRITERION 4 
    Lubrication system faults and their causes are repaired to restore full serviceability. 

    ASSESSMENT CRITERION 5 
    Faulty components are replaced with working parts in accordance with manufacturer specifications. 

    SPECIFIC OUTCOME 5 
    Conduct post repair functions. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The work area is left clean and tidy in accordance with workplace requirements. 

    ASSESSMENT CRITERION 2 
    Tools and equipment are cleaned and stored in accordance with workplace requirements. 

    ASSESSMENT CRITERION 3 
    Worn and/or damaged parts replaced are recorded and reported to relevant personnel in accordance with company procedures. 

    ASSESSMENT CRITERION 4 
    Components used are described and recorded accurately for costing purposes. 

    ASSESSMENT CRITERION 5 
    Job cards are completed and stored in accordance with company requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the Unit Standard.
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:
  • Workplace procedures.
  • Safe working practices.
  • The use and application of automotive engineering tools.
  • How to locate manufacturer specifications in a workshop manual.
  • The types of lubricants.
  • The components of a lubrication system.
  • The methods of lubrication.
  • The use and applicability of lubrication additives. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Terminology:

    Terms used in this unit standard are generic to the automotive engineering industry in South Africa.

    Notes to assessors:

    Assessors should keep the following principles in mind when designing and conducting assessments against this unit standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the person competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
  • Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.
  • Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
  • The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
  • All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, direct, authentic, sufficient, systematic, open and consistent.

    The following particular issues should be taken into consideration when assessing against this unit standard:
  • The assessment must take place in a fully equipped workshop where all the tools and equipment required for the task are available.
  • The engine performance once it has been started will provide additional evidence of the candidate's ability to repair a lubrication system.
  • Assessment may take place against either a petrol or diesel engine. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  78524   National Certificate: Automotive Repair and Maintenance  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  58497   National Certificate: Automotive Repair and Maintenance  Level 3  NQF Level 03  Passed the End Date -
    Status was "Registered" 
    2009-02-18  Was MERSETA until Last Date for Achievement 
    Elective  66049   Further Education Training Certificate: Diesel Electric and Electric Fitting  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.