SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Lift and move a load using the pick and carry method 
SAQA US ID UNIT STANDARD TITLE
253615  Lift and move a load using the pick and carry method 
ORIGINATOR
SGB Generic Manufacturing, Engineering, Technology 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Engineering and Related Design 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for a learner within the mechanical handling (rigging) context.

A person credited with this unit standard is able to:
  • Discuss and explain the pick and carry method.
  • Plan and prepare to lift and move a load using the pick and carry method.
  • Pick and carry a load.
  • Maintain, care and store equipment.

    This unit standard will contribute to the full development of any learner by providing recognition, further mobility and transportability within the field. The knowledge, skills and understanding demonstrated in this unit standard are essential for social and economic transformation and the upliftment of individuals within various manufacturing and engineering contexts. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    This unit standard has been designed as part of a progression. It is one of a series of unit standards for learners in the mechanical handling or related engineering environment.

    The credits allocated to this unit standard assume that a learner has already learned to use hand tools, is able to inspect and use manual lifting equipment and tackle and is able to work safely. 

    UNIT STANDARD RANGE 
    General guide for scope, context and level for the purpose of learning and assessment:
  • Lifting equipment includes chain blocks; lever hoists; slings, rope, shackles, eye bolts, spreader and equalising beams, clamps.
  • Cranes used include but is not limited to mobile cranes.
  • Knowledge of slinging methods.
  • Standard formulas for calculation of mass of final loads in the hook.
  • Techniques for evaluating ground conditions and overhead hazards.
  • Methods and measures for the safe control of loads during lifting procedure.
  • Materials and methods used for fixing, anchoring, bracing, supporting and securing loads.
  • Visual identification of winch defects.
  • Cleaning of lifting equipment.
  • Statutory requirements include OHS Act and local authority requirements.
    Worksite practices include but are not limited to written and/or verbal procedures.

    Environment contexts include but are not limited to:
  • Manufacturing and Engineering (Metals, Plastics, Tyre and Rubber, Electrical Power Generation, Automotive Manufacturing).
  • Chemical and Petrochemical.
  • Mining.
  • Transport (Maritime, Road, Rail and Aviation).
  • Civil Engineering and Construction.
  • Food and Beverages.
  • Other engineering-related industry sectors.

    The learner should be able to:
  • Work autonomously with minimal supervision and according to worksite and manufacturer specifications and occupational safety, health and environmental legislation.
  • Work in a workshop, plant or underground environment with varying levels of light, space and safety risks.
  • Work in a team environment.

    Reference to legislative requirements cover a broad context, and may include Occupational, Health and Safety Act; Driven Machinery Act; Mine Health and Safety Act; The Maritime Occupational Safety Regulations, 1994.

    Safe control and storage, includes maintaining a record of usage, cleaning and general storage methods.

    Learning context:
  • Formal, informal learning and RPL can be obtained for this unit standard.
  • The learner should be assessed under supervision.

    Level:

    Level (for Level 2):

    A learning programme leading to the awarding of this unit standard should develop learners who demonstrate:
  • Ability to carry out moderate tasks that are familiar.
  • Ability to offer a clear choice of routine responses.
  • Basic operational knowledge base as indicated in the embedded knowledge component and that are readily available.
  • An understanding of known solutions to familiar problems with little generation of new ideas. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Discuss and explain the pick and carry method. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Various types of lifting equipment and their applications using the pick and carry method, are identified and explained. 

    ASSESSMENT CRITERION 2 
    The correct methods and techniques of the use of lifting equipment and the consequences of unsafe use, is explained and discussed. 

    ASSESSMENT CRITERION 3 
    Terms and definitions are consistent with generally accepted mechanical handling terminology. 

    ASSESSMENT CRITERION 4 
    Safety precautions applicable to the pick and carry method are explained. 

    ASSESSMENT CRITERION 5 
    Potential hazards during the pick and carry process are identified and corrective action explained. 
    ASSESSMENT CRITERION RANGE 
  • Lifting equipment and tackle include but is not limited to chain blocks; lever hoists; slings, rope, shackles, eye bolts, spreader and equalising beams, clamps.
  • Methods and techniques include but are not limited to techniques for evaluating ground conditions and overhead hazards, methods and measures for the safe control of loads during lifting procedure.
  • Safety precautions include the use of personal protective equipment and the application of preventative safety measures.
     

  • SPECIFIC OUTCOME 2 
    Plan and prepare to lift and move the load using the pick and carry method. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The scope and precise nature of the lifting and moving task is explained, in accordance with work instructions. 

    ASSESSMENT CRITERION 2 
    Resources are correct for the task, available on site by the agreed time, and checked for serviceability in accordance with work instructions and standard worksite practices. 
    ASSESSMENT CRITERION RANGE 
    Lifting equipment, support materials, applicable documentation, personal protective equipment, crane/s, personnel.
     

    ASSESSMENT CRITERION 3 
    Pre-operational checks are carried out in accordance with work instruction sheet. 

    ASSESSMENT CRITERION 4 
    Hazards are identified and corrective action taken in terms of worksite practice and regulatory requirements. 
    ASSESSMENT CRITERION RANGE 
    Evaluation of ground conditions includes but is not limited to:
  • Location of underground services, ground stability, water tables, tidal conditions on the quay-side (marine), ship's stability.

    Range of overhead hazards include but are not limited to:
  • Power lines, telephone cables, bridge structures, buildings, ship's structure.

    The precise nature of the task includes a comparison of the load, the required capacity of equipment and evaluation of charts and specifications.
     

  • SPECIFIC OUTCOME 3 
    Pick and carry the load. 
    OUTCOME NOTES 
    The learner is required to demonstrate competence in lifting and moving a load using the pick and carry method.

    Objects to be used for the purpose of assessment may include but is not limited to:
  • Structural objects (eg. steel, timber, pre-cast concrete or other similar materials).
  • Machinery and/or machine components which are commonly handled within a variety of industrial environments.

    For the purpose of assessment, documentation may include:
  • A work instruction or jobbing sheet.
  • Work drawings.
  • Permit conditions. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The pick and carry task is carried out in accordance with the work instruction sheet, permit conditions and drawings. 

    ASSESSMENT CRITERION 2 
    Safety precautions are applied and adhered to in accordance with legislative requirements and manufacturers' specifications. 
    ASSESSMENT CRITERION RANGE 
    Control and safety measures include but are not limited to:
  • Obstacles, wind conditions, tidal conditions, final position and design specifications.

    Safe working practices include but are not limited to:
  • Site access, communication and signal methods, centre of gravity of load and tag-lines.
     

  • ASSESSMENT CRITERION 3 
    No damage is incurred on the lifting equipment, related accessories and fellow workers. 

    ASSESSMENT CRITERION 4 
    The load is inspected for damage and its final position conforms to work instructions, as reflected on the drawing or job instructions. 

    SPECIFIC OUTCOME 4 
    Maintain, care and store equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Lifting equipment and related accessories are dismantled, inspected and stored in accordance with manufacturer's specification and worksite requirements. 

    ASSESSMENT CRITERION 2 
    The proper care and storage procedures for tools and equipment is demonstrated in accordance with worksite practices and specifications. 

    ASSESSMENT CRITERION 3 
    Information regarding the use of the lifting equipment and related accessories is recorded in accordance with regulations and accepted worksite practice. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard must be accredited in terms of the criteria laid down by the relevant ETQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names & functions of:
  • Lifting equipment and related accessories.
  • Lifting equipment components.
  • Personal protective equipment.

    Attributes, descriptions, characteristics & properties:
  • Different types of loads and the application of slinging equipment.
  • Characteristics of different types of slinging equipment.
  • Common defects.
  • Hazards.

    Sensory cues:
  • Visual observance.
  • Mental alertness.

    Purpose of:
  • Lifting equipment.
  • Safety checks.
  • Quality checks.
  • Permit conditions.

    Processes, events, causes and effects, implications:
  • Implications of using incorrect lifting equipment.
  • Implications of ignoring lifting equipment defects.
  • Implications of not following lifting equipment checking procedures.
  • Implications of not preparing adequately.
  • Implications of not caring for equipment.

    Procedures and techniques:
  • Preparation procedures for using lifting equipment to lift and move a load.
  • Techniques related to the safe use of lifting equipment.
  • Slinging methods.
  • Methods for the safe storage of lifting equipment.
  • Safety procedures.
  • Procedures for maintaining and recording the status of lifting equipment and accessories.
  • Quality procedures.
  • Methods and measures for the safe control of loads during a pick and carry procedure.
  • Materials and methods used for attaching, anchoring, bracing, supporting and securing loads.

    Regulations, legislation, agreements, policies, standards:
  • Applicable safety, health and environmental legislation and standards.
  • Driven Machinery Act.
  • Occupational Safety and Health Act.
  • Other related regulations.

    Theory: rules, principles, laws:
  • Applicable basic lifting theory related to the safe use of lifting equipment.
  • Calculations related to work load limit (WLL).
  • Standard formulas for calculation of mass of final loads in the hook.
  • Safety principles governing the pick and carry method.

    Relationships, systems:
  • Relationship of the type of load to the use of appropriate slinging method.
  • Relationship of power to weight as a ratio.
  • Relationship between safety, lifting or moving a load efficiently and productively.
  • Quality of workmanship. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Recognise problems while lifting or moving a load and responding appropriately.
  • Recognise and correct defects. 

  • UNIT STANDARD CCFO WORKING 
    Work together with others:
  • Participate in efforts of workgroup. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Plan the sequence of operations based on job instructions and set up equipment appropriately. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Interpret information off job instructions and make decisions based on that information.
  • Identify defects. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Provide feedback on outcome of work to appropriate personnel.
  • Report defects to a competent person. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Understanding center of gravity, load/weight/mass, moments about a force. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Relationship between mechanical handling and the broader engineering environment. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    Assessors should keep the following general principles in mind when designing and conducting assessments against this unit standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the person competent in terms of the title. Where assessments at title level are unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
  • Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.
  • Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
  • The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
  • All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, directness, authenticity, sufficiency, openness and consistency. 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Recognition of Prior Learning:

    Credits may be obtained by applying to an accredited/approved training provider/institution in order to have prior learning recognised in lieu of past work experience. Past experience must relate to the specific outcomes contained within this unit standard. The ensuing assessment of candidates seeking recognition of prior learning should not be so onerous as to deter them from doing so. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  59730   National Certificate: Mechanical Handling (Rigging)  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.