SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Mine fine granular material by means of hydraulic monitoring 
SAQA US ID UNIT STANDARD TITLE
9736  Mine fine granular material by means of hydraulic monitoring 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2005-04-13  2008-04-13  SAQA 0859/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2009-04-13   2012-04-13  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
256699  Mine fine granular material by means of hydraulic monitoring  Level 3  NQF Level 03   

PURPOSE OF THE UNIT STANDARD 
This unit standard is for persons responsible for mining fine granular material by using a high pressure water cannon (monitoring gun). A person credited with this unit standard can:
  • Demonstrate knowledge relating to the hydraulic mining of fine granular material.
  • Prepare to mine fine granular material.
  • Mine fine granular material by means of a high-pressure water cannon (monitoring gun).
  • Complete duties pertaining to the hydraulic mining operation. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Literacy and numeracy at ABET 2 or equivalent.

    Competence in the following:
  • Adhere to occupational health, safety and environmental practices within hydraulic mining.
  • Use of hand tools.
  • Reading and interpretation of site plans. 

  • UNIT STANDARD RANGE 
    None 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Mine fine granular material by means of Hydraulic monitoring. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Demonstrate knowledge relating to the hydraulic mining of fine granular material. 

    ASSESSMENT CRITERION 2 
    2. Prepare to mine fine granular material. 

    ASSESSMENT CRITERION 3 
    3. Mine fine granular material by means of a high-pressure water cannon (monitoring gun). 

    ASSESSMENT CRITERION 4 
    4. Complete duties pertaining to the hydraulic mining operation. 

    SPECIFIC OUTCOME 2 
    Demonstrate knowledge relating to the hydraulic mining of fine granular material. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. The legal and specified requirements pertaining to a safe, healthy work environment in the hydraulic mining of fine material and the consequences of not adhering to the above are explained. 

    ASSESSMENT CRITERION 2 
    2. The importance of the hydraulic mining in terms of achieving specified production requirements is explained. 

    ASSESSMENT CRITERION 3 
    3. Hazards and associated risks, pertaining to the mining process, identified through specified risk assessment procedures and the actions to be taken should they be encountered are explained. 

    ASSESSMENT CRITERION 4 
    4. The mining method and process control are explained in accordance with specified requirements. 

    ASSESSMENT CRITERION 5 
    5. The principle components and the specifications of the hydraulic mining system are identified and their functions explained. 
    ASSESSMENT CRITERION RANGE 
    Principle components must include:
  • Pump stations,
  • Monitor guns,
  • Valves,
  • Pipelines,
  • Drainage pipes,
  • Safety devices,
  • Launders,
  • Screens,
  • Strainer boxes,
  • Clamps,
  • Auxiliaries
     

  • ASSESSMENT CRITERION 6 
    6. The specified communication requirements pertaining to the mining operation and the consequences of non-compliance are explained. 

    ASSESSMENT CRITERION 7 
    7. The specified actions to be taken, should sub-standard conditions and problems be encountered, are explained. 

    SPECIFIC OUTCOME 3 
    Prepare to mine fine granular material. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Personal protective and safety equipment is verified, examined and used in accordance with specified requirements. 

    ASSESSMENT CRITERION 2 
    2. Tools and equipment are verified and examined in accordance with specified requirements. 

    ASSESSMENT CRITERION 3 
    3. Workplace hazards and associated risks are dealt with in accordance with specified requirements. 

    ASSESSMENT CRITERION 4 
    4. The mining area is examined and substandard conditions are dealt with in accordance with specified requirements. 

    ASSESSMENT CRITERION 5 
    5. The pipelines and monitoring gun are positioned and secured in accordance with specified requirements. 

    ASSESSMENT CRITERION 6 
    6. Safety and health procedures towards self and others are maintained in accordance with specified requirements. 

    SPECIFIC OUTCOME 4 
    Mine fine granular material by means of a high-pressure water cannon. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Personal protective and safety equipment is used in accordance with specified requirements. 

    ASSESSMENT CRITERION 2 
    2. Tools and equipment are used in accordance with specified requirements. 

    ASSESSMENT CRITERION 3 
    3. Work related hazards and associated risks are dealt with in accordance with specified requirements. 

    ASSESSMENT CRITERION 4 
    4. The hydraulic mining process is started and controlled in accordance with specified requirements. 

    ASSESSMENT CRITERION 5 
    5. The flow of slurry to the pump station is monitored and controlled in accordance with specified requirements. 

    ASSESSMENT CRITERION 6 
    6. Unwanted material is removed in accordance with specified requirements. 

    ASSESSMENT CRITERION 7 
    7. Problems encountered are dealt with in accordance with specified requirements. In the absence of problems the actions to be taken should they be encountered, are explained. 

    ASSESSMENT CRITERION 8 
    8. The hydraulic mining process is consistent with environmental policy and other specified requirements. 

    ASSESSMENT CRITERION 9 
    9. Safety and health procedures towards self and others are maintained in accordance with specified requirements. 

    SPECIFIC OUTCOME 5 
    Complete the duties pertaining to the hydraulic mining operation. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. The hydraulic mining process is stopped in accordance with specified requirements. 

    ASSESSMENT CRITERION 2 
    2. Personal protective and safety equipment is dealt with in accordance with specified requirements. 

    ASSESSMENT CRITERION 3 
    3. Tools and equipment are dealt with in accordance with specified requirements. 

    ASSESSMENT CRITERION 4 
    4. Good housekeeping practices are maintained in accordance with specified requirements. 

    ASSESSMENT CRITERION 5 
    5. Safety devices are installed in accordance with specified requirements. 

    ASSESSMENT CRITERION 6 
    6. Specified reporting and data-recording requirements are met. 

    ASSESSMENT CRITERION 7 
    7. Preparation for maintenance is in accordance with specified requirements. 

    ASSESSMENT CRITERION 8 
    8. Lock-out procedures are adhered to in accordance with specified requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    1. Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.

    2. Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA.

    3. Moderation of assessment will be overseen by the relevant ETQA according the moderation guidelines in the relevant qualification and the agreed ETQA procedures. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Embedded knowledge is addressed in all the specific outcomes and assessment criteria throughout the unit standard. The embedded knowledge includes basic verbal communication skills, including following instructions, expressing statements of situation, co-ordinate with others and basic comprehension skills relating to understanding the separate functions and tasks as being interrelated and integral to the whole. 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Solve problems. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team/group/organisation/community. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one`s activities responsibly and effectively. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively using visual, mathematics and language skills in the modes of oral and written presentations. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems. 

    UNIT STANDARD CCFO CONTRIBUTING 
    Contribute to the full personal development of each learner and the social and economic development of society at large. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 256699, which is "Mine fine granular material by means of hydraulic monitoring", Level 3, 7 credits.

    Terminology:

    Specified Requirements include Legal Requirements and are contained in one or more of the following:
  • Managerial instructions.
  • Codes of Practice.
  • Plant standards.
  • Standard task procedures.
  • Risk assessment documentation.
  • Working guides.
  • Manufacturer`s specifications.
  • Health and safety management programme.
  • Mines Health and Safety Act.
  • Minerals Act and Regulations.
  • Security Procedures.
  • Environmental Legislation. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49044   National Certificate: Mineral Processing, Gold Extraction  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2008-08-20  Was MQA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.