All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |
SOUTH AFRICAN QUALIFICATIONS AUTHORITY |
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: |
Operate a truck mounted loader crane |
SAQA US ID | UNIT STANDARD TITLE | |||
116253 | Operate a truck mounted loader crane | |||
ORIGINATOR | ||||
SGB Civil Engineering Construction | ||||
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY | ||||
- | ||||
FIELD | SUBFIELD | |||
Field 12 - Physical Planning and Construction | Civil Engineering Construction | |||
ABET BAND | UNIT STANDARD TYPE | PRE-2009 NQF LEVEL | NQF LEVEL | CREDITS |
Undefined | Regular | Level 2 | NQF Level 02 | 20 |
REGISTRATION STATUS | REGISTRATION START DATE | REGISTRATION END DATE | SAQA DECISION NUMBER | |
Passed the End Date - Status was "Reregistered" |
2018-07-01 | 2023-06-30 | SAQA 06120/18 | |
LAST DATE FOR ENROLMENT | LAST DATE FOR ACHIEVEMENT | |||
2026-06-30 | 2029-06-30 |
In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise. |
This unit standard does not replace any other unit standard and is not replaced by any other unit standard. |
PURPOSE OF THE UNIT STANDARD |
The qualifying learner is capable of:
Demonstrating an integrated practical and theoretical grounding in Crane Operations according to safe handling and maintenance practices in compliance with crane manufacturer's and legislated standards. The contribution to The National Skills Development Strategy is the key developmental interface between learners and new competencies to be achieved. Learners who master the applied competence described in this unit standard will contribute to the development of a professional community of Civil Engineering Construction Crane Operators who are able to competently use science and technology when applying operation techniques The contribution to socio-economic transformation is that learners will be able to undergo RPL-assessment and thereby receive recognition for previous learning and experience. This in turn will enhance the employability and career prospects of learners employed in this sector. |
LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING |
The following knowledge, skills attitude and/or equivalent:
Learning assumed to be in place NQF Level 1 Numeracy and NQF Level 1 Literacy The driver should be declared physically fit and have completed an eyesight test (such as the Orthorator test, the Purdue University Test No. 3, etc.) and an industry recognised depth perception and hand-eye co-ordination test. It is assumed that people starting to learn towards this unit standard have already undergone company induction, have an appropriate licence to operate in the work area, and are competent in unit standards which address: |
UNIT STANDARD RANGE |
Limited to work carried out on a standard crane, or with standardised fittings
Major components include: Factors influencing safety and suitability of a crane: Proximity of other machines and workers, vehicles, equipment, ground condition, underground services, overhead power lines, overhead service lines, trees, buildings, structures, unauthorised people, stability, suitability, state of repair Statutory requirements include but are not limited to: Appropriate checklist is any one or a combination of the following: Inspecting and recording the operational fitness of all components of the crane should cover: Worksite procedures include manufacturer's procedures, operators manuals and site operational requirements, or similar procedures |
Specific Outcomes and Assessment Criteria: |
SPECIFIC OUTCOME 1 |
Demonstrate knowledge of the functions of a truck mounted loader crane. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The main functions of Truck Mounted Loader Crane's are explained in terms of manufacturer's specifications. |
ASSESSMENT CRITERION 2 |
The operation of all major components is explained in terms of their functions. |
ASSESSMENT CRITERION 3 |
All safety features and warning devices on the crane are identified, and their purposes explained in accordance with manufacturer's specifications. |
ASSESSMENT CRITERION 4 |
The maximum operating capacities are explained in terms of the designed crane capabilities. |
ASSESSMENT CRITERION 5 |
Warnings from crane indicators and gauges are explained according to manufacturer's specifications. |
ASSESSMENT CRITERION 6 |
Corrective actions are described or demonstrated in terms of neutralising warnings received. |
SPECIFIC OUTCOME 2 |
Identify the safety and suitability of the crane. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Demonstrate the ability to identify the suitability of the crane prior to utilisation |
ASSESSMENT CRITERION 2 |
Demonstrate ability to assess operational capability of lifting equipment (e.g. correct SWL of slings etc). |
ASSESSMENT CRITERION 3 |
Demonstrate an understanding of the influence of load/range characteristics, manufacturers' requirements and environmental conditions. |
ASSESSMENT CRITERION 4 |
Demonstrate an understanding of what constitutes safety in the broader working environment, and when operating a Truck Mounted Loader Crane in compliance with statutory regulations. |
SPECIFIC OUTCOME 3 |
Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Pre-operational checks are carried out according to appropriate checklist. |
ASSESSMENT CRITERION 2 |
Daily and weekly operator maintenance is performed according to the appropriate post-operational checklist and recordkeeping using a logbook. |
ASSESSMENT CRITERION 3 |
Checklist is completed according to worksite procedures and corrective action taken if required, ensuring compliance with manufacturer's specifications. |
ASSESSMENT CRITERION 4 |
Appropriate measures used to rectify and/or prevent basic faults and defects in the mechanical function of the crane are identified. |
SPECIFIC OUTCOME 4 |
Operate truck mounted loader crane. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The purpose of the various controls is explained in accordance with their designed use. |
ASSESSMENT CRITERION 2 |
Functions of the various controls are demonstrated in accordance with the manufacturer's specifications. |
ASSESSMENT CRITERION 3 |
Controls are used to effectively manoeuvre the crane within manufacturer's specifications. |
ASSESSMENT CRITERION 4 |
Safe working procedures are followed according to manufacturer's specifications, site specific and statutory requirements. |
ASSESSMENT CRITERION 5 |
Crane performance is monitored and corrective action is taken when necessary, in accordance with manufacturer's specifications. |
ASSESSMENT CRITERION 6 |
Crane is operated without risk of damage or loss to machine or property, or injury to people. |
ASSESSMENT CRITERION 7 |
Hazards specific to operating Truck Mounted Loader Crane's and ways to minimise these are explained in terms of potential damage to machine and property, and injury to people. |
ASSESSMENT CRITERION 8 |
Start-up and shutdown procedures are followed according to manufacturer's specifications. |
ASSESSMENT CRITERION 9 |
Truck Mounted Loader Crane is parked according to manufacturer's and company requirements. |
UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS |
UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE |
UNIT STANDARD DEVELOPMENTAL OUTCOME |
N/A |
UNIT STANDARD LINKAGES |
N/A |
Critical Cross-field Outcomes (CCFO): |
UNIT STANDARD CCFO IDENTIFYING |
Identify and solve problems
Evident in the following speicific outcome and assessment creteria: Demonstrate knowledge of the functions of a truck mounted loader crane |
UNIT STANDARD CCFO WORKING |
Work effectively with others
Evident in the following speicific outcome and assessment creteria: Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane |
UNIT STANDARD CCFO ORGANISING |
Employ self management
Evident in the following speicific outcome and assessment creteria: Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane > Daily and weekly operator maintenance is performed according to the appropriate post-operational checklist and record keeping using a logbook. |
UNIT STANDARD CCFO COLLECTING |
Manage information
Evident in the following speicific outcome and assessment creteria: Demonstrate knowledge of the functions of a truck mounted loader crane |
UNIT STANDARD CCFO COMMUNICATING |
Communicate effectively
Evident in the following speicific outcome and assessment creteria: Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane > Appropriate measures used to rectify and/or prevent basic faults and defects in the mechanical function of the crane are identified. |
UNIT STANDARD CCFO SCIENCE |
Demonstrate scientific and technological competence
Evident in the following speicific outcome and assessment creteria: Identify the safety and suitability of the crane. |
UNIT STANDARD CCFO DEMONSTRATING |
Understand contextual world-systems
Evident in the following speicific outcome and assessment creteria: Identify the safety and suitability of the crane Operate a truck mounted loader crane |
UNIT STANDARD ASSESSOR CRITERIA |
N/A |
REREGISTRATION HISTORY |
As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. |
UNIT STANDARD NOTES |
N/A |
QUALIFICATIONS UTILISING THIS UNIT STANDARD: |
ID | QUALIFICATION TITLE | PRE-2009 NQF LEVEL | NQF LEVEL | STATUS | END DATE | PRIMARY OR DELEGATED QA FUNCTIONARY | |
Elective | 48961 | National Certificate: Construction: Crane Operations | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | CETA |
Elective | 59729 | National Certificate: Mechanical Handling (Rigging) | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 48794 | National Certificate in Quality Checking of Tyres and Tyre Components | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 71989 | National Certificate: Automotive Components: Manufacturing and Assembly | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 50020 | National Certificate: Construction and Maintenance of Overhead Track Equipment | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | TETA |
Elective | 58862 | National Certificate: Electro-Mechanical Winding | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 58720 | National Certificate: Engineering Fabrication | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 64829 | National Certificate: Lifting Machine Operations | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | TETA |
Elective | 23255 | National Certificate: Mechanical Engineering: Fitting and Machining | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 91926 | National Certificate: Mechanical Engineering: Machining and Tooling | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 67609 | National Certificate: Mechatronics | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 79666 | National Certificate: Metal and Engineering Manufacturing Processes | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 64190 | National Certificate: Metals Production | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 49449 | National Certificate: Plastics Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 36155 | National Certificate: Polymer Composite Fabrication | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 79407 | National Certificate: Polymer Compound Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 21012 | National Certificate: Power and Telecommunication Cable Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 50285 | National Certificate: Professional Driving | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | TETA |
Elective | 24217 | National Certificate: Thermoplastic Fabrication | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 48798 | National Certificate: Tyre and Tyre Component Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 48795 | National Certificate: Tyre Assembly | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 57886 | National Certificate: Welding Application and Practice | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: |
This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here. |
1. | Adimire Operators Skills Training Centre |
2. | AETA Training Solutions |
3. | Algoa Bus Company |
4. | ALLOYS HEAD OFFICE |
5. | Andebe Group |
6. | Aveng Grinaker -LTA Civil Engineering |
7. | Biva Investments (Pty) Ltd |
8. | BJS FORKLIFTS TRAINING |
9. | Buscor |
10. | Dee-Bravo Training Centre |
11. | Dionysus Skills Development Initiative (Pty) Ltd |
12. | Diversity technology Training Institute |
13. | Dreyer & Dreyer Risk Solutions |
14. | Edu Wize Group Pty Ltd |
15. | ESS Holdings (PTY) Ltd |
16. | Evaflex |
17. | Excellect 209 (PTY) LTD |
18. | Excellect 209 PTY LTD |
19. | G T Training Service Provider |
20. | Hazchemwize (PTY) Ltd |
21. | He and She Driver Training Centre |
22. | imithetho labour law |
23. | Inkqubela Consultants |
24. | KKH Operator Training and Projects Pty Ltd |
25. | Kriel Training (PTY) LTD |
26. | Kulika Training and Consultancy Pty Ltd |
27. | Learncorp |
28. | Learning Exchange Pty (Ltd) |
29. | Licence Wise |
30. | MadibengGeneral Suppliers |
31. | Makwedeng Training |
32. | Merrod Trading 122 Pty Ltd |
33. | Mpofu Engineering Projects |
34. | Mziphela Training and Projects Pty. Ltd |
35. | NOSA LOGISTICS PTY LTD |
36. | NS Traders |
37. | Pal Passenger Bus Services |
38. | Palesa Rail Academy |
39. | Phephani Learnerships cc |
40. | PPLE Group Pty Ltd |
41. | Primeserv Corporate Solutions (Pty) Ltd |
42. | PRO Skills Development (Pty) Ltd |
43. | PRO Skills Development Pty Ltd |
44. | PUTCO Limited |
45. | PUTCO Pty Ltd |
46. | Quantum Leap College Pty Ltd |
47. | Renntek Pty Ltd |
48. | Shadamston College |
49. | Siyashayela Training and Development |
50. | Sobabini Group Pty Ltd |
51. | SPINA Consultancy cc Cape Town |
52. | Striving Mind Academy and Consultancy Pty Ltd |
53. | SVA Training |
54. | Tamar Academy (Pty) Ltd |
55. | The Assessment Zone (Pty) Ltd |
56. | The Skills Authority |
57. | THE SKILLS COLLEGE FOR DEVELOPMENT AND TRAINING(PTY) LTD |
58. | Tjeka Training Matters Pty Ltd |
59. | Training Consultant and SD College |
60. | Transvaal Training |
61. | Triton Express (Pty) Ltd |
62. | Triton Express Pty Ltd |
63. | Uthingo Training Centre |
64. | Wheelman S A |
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |