SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Produce seamless hot-finished tube and pipe 
SAQA US ID UNIT STANDARD TITLE
119055  Produce seamless hot-finished tube and pipe 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  60 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
I am capable of:
Learners who are involved in producing seamless hot-finished steel tube and pipe require the skills, values and knowledge reflected in this unit standard.

Qualifying learners can prepare for the process and produce seamless hot-finished steel tube and pipe. They will understand the importance of effective equipment control and how this is achieved. This will include monitoring the reheating, piercing, hot forming and stretch reduction processes, identifying non-conformances and taking corrective action.

The learning outcomes in this unit standard also contribute to the exit level outcomes required for the National Certificate in Steel Tube and Pipe Manufacturing (Seamless Hot-Finished, Welded or Cold-Formed) (NQF level 4) and related qualifications. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
It is assumed that learners are competent in:
  • Communication and mathematical literacy at NQF Level 3 or equivalent
  • The unit standards:
    "Set up process for tube and pipe production"
    "Perform tube and pipe product tests and interpret results" 

  • UNIT STANDARD RANGE 
  • The learner should be able to work autonomously with minimal supervision and according to worksite and manufacturer specifications and occupational safety, health and environmental legislation.
  • Work is generally, but not exclusively, carried out in a team environment
  • Seamless hot-finished tube and pipe processes include reheating, piercing, hot forming, stretch reduction and straightening.
  • Apply safety, health, environmental and quality procedures
  • Production quantity goals are met
  • Product complies with production and customer specifications
  • Availability and utilisation of equipment is maximised
  • Costs incurred are within prescribed budgetary constraints
  • Process tools, equipment and consumables are utilised according to operational and manufacturer's requirements
  • Accurate production data is recorded, process documentation is timeously processed and affected parties liased with
  • Continuous quality product flow is maintained
  • Critical process and sub-process parameters and efficiency are monitored, analysed and adjusted
  • Non-conformances in process and defects in equipment is timeously identified, actioned and continuously monitored
  • Applicable procedures are followed and understood
  • Process constraints are managed
  • Strategies, options and choices are described an discussed 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Plan the manufacturing process. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Plan the process against production schedule requirements 

    ASSESSMENT CRITERION 2 
    Check availability of materials, tools and equipment necessary for process 

    ASSESSMENT CRITERION 3 
    Communicate product quantity and quality requirements with appropriate personnel 
    ASSESSMENT CRITERION RANGE 
  • Process plan includes planning for product and shift changeover situations
  • Materials include graphite and nitrogen
     

  • SPECIFIC OUTCOME 2 
    Roll hot-finished product. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Start up process 

    ASSESSMENT CRITERION 2 
    Monitor and control process variables and deviations 

    ASSESSMENT CRITERION 3 
    Compare process performance to optimise equipment operation 

    ASSESSMENT CRITERION 4 
    Monitor and adjust process flow 

    ASSESSMENT CRITERION 5 
    Interpret sample analysis 

    ASSESSMENT CRITERION 6 
    Identify root cause of quality problems 

    ASSESSMENT CRITERION 7 
    Make adjustments to bring process back into line 

    ASSESSMENT CRITERION 8 
    Test corrective action to determine if problem is solved 

    ASSESSMENT CRITERION 9 
    Manage waste 

    ASSESSMENT CRITERION 10 
    Control costs to within budget 

    ASSESSMENT CRITERION 11 
    Shut down process 

    ASSESSMENT CRITERION 12 
    Record activities and process results 
    ASSESSMENT CRITERION RANGE 
  • Process constraints include stoppages and breakdowns
  • Product forming includes reheating, piercing, hot forming, stretch-reduction and straightening
  • Results include settings and adjustments made to ensure repeatability
     

  • SPECIFIC OUTCOME 3 
    Identify defects, non-conformances and hazardous conditions and take corrective action. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Defects, non-conformances and hazardous conditions are identified 

    ASSESSMENT CRITERION 2 
    Corrective action and preventative methods for the non-conformances are applied and taken 

    SPECIFIC OUTCOME 4 
    Execute changeover process. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Execute process and product changeover as required by production schedule requirements 

    ASSESSMENT CRITERION 2 
    Instruct and discuss forward actions with workgroup members who will take over the running of the process 
    ASSESSMENT CRITERION RANGE 
    Changeovers include product and shift changeover situations
     

    SPECIFIC OUTCOME 5 
    Work safely with due care for self, fellow workers, equipment, materials and the environment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Apply safety, health, environmental and quality procedures 

    ASSESSMENT CRITERION 2 
    Appropriate safety equipment and clothing is utilised. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the Unit Standard.
    Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    1. Names and functions of:
  • Consumables
  • Materials
  • Components, controls, instruments and equipment
  • Hydraulic, pneumatic, heating, cooling, electrical, oxygen and gas systems
  • Product

    2. Attributes, descriptions, characteristics & properties:
  • Typical product non-conformances
  • Common causes of product defects
  • Steel seamless hot-finished tube and pipe specifications
  • Materials to be processed
  • Company product range and application
  • Equipment, machines and tooling
  • Steel tube and pipe manufacturing process
  • Machinery specifications and capacity
  • Local and international product specifications
  • Properties of steel metals
  • Preventive maintenance
  • Common causes of equipment failure
  • Common areas of wear and tear on equipment
  • Process control software

    3. Purpose of:
  • Monitoring equipment indicators
  • Performing pre-operational checks
  • Steel tube and pipe specifications
  • Managing constraints
  • Analysing process parameters
  • Product changeovers
  • Set up procedures
  • Quality control procedures
  • Health, safety and environmental procedures

    4. Sensory cues
  • Cues for different defects (visual, noise, smell, vibration) related to producing steel seamless hot-finished tube and pipe

    5. Processes, events, causes and effects, implications:
  • Temperature and state changes
  • Pressure changes
  • Oil temperature changes
  • Equipment calibration process
  • Impact of settings on product cost
  • Things going wrong, e.g. accidents, power and service failure, wrong or poorly prepared materials, poor planning procedures, change of plan or schedules
  • Impact of early diagnosis of equipment malfunctioning
  • Product and shift changeover
  • Causes and effects / implications of not managing constraints

    6. Procedures and techniques:
  • Business procedures and policies
  • Emergency
  • Company (worksite) and international
  • Safety, health and environmental
  • Document processes
  • Process analysis controlling
  • Manufacturing practices
  • Product shape control
  • Product rolling
  • Material recycling
  • Quality
  • Worksite / standard operating procedures
  • Problem solving and continuous improvement
  • Product testing
  • Analysing and interpreting test results
  • Installation and removal of equipment
  • Setting and running of equipment
  • Shutting down
  • Communication
  • Team work
  • Recording and report
  • Procedures for reporting major problems with machinery and equipment
  • Managing constraints
  • Theory of constraints
  • Product and shift changeover

    7. Regulations, legislation, agreements, policies, standards:
  • Regulations related to safety, health and environment
  • Regulations appropriate to the product
  • Provisions of applicable acts
  • National and international tube and pipe manufacturing standards

    8. Theory: rules, principles, laws:
  • Metallurgical principles related to the product and the process, e.g. quality, grades, chemical composition of materials
  • Applicable fundamentals of Metallurgy
  • Process principles relating to cooling, oxidisation, hot-forming and stretch reduction
  • Temperature, changes of state, melting properties
  • Torque, viscosity, fluid dynamics
  • Electricity, current, power, resistance, circuits, components
  • Behaviour of gases, fluids and solids
  • Pressure, vacuum
  • Applicable units of measure
  • Theory of constraints

    9. Relationships, systems:
  • Relationship between materials, equipment, process, product and customer
  • Auxiliary services influences on quality
  • Relationships between process set up and control and final product
  • Impact of troubleshooting and diagnosing malfunctions on equipment on production efficiencies 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems
  • Identify process deviations and take appropriate corrective action
  • Identify and correct conditions or practices which will damage or reduce the life of the machinery and equipment
  • Identify conditions or practices that will impact on the properties of the material to be processed or the end product performance and correct. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others
  • Interact with workgroup members to effect efficient and problem free manufacturing and changeovers
  • Interact with maintenance specialists to troubleshoot and determine most effective ways of repairing problems / optimising manufacturing process
  • Organise work teams 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities
  • Acquire and follow appropriate production schedule
  • Prepare, plan and sequence production events
  • Demonstrate decision making
  • Manage time effectively 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information
  • Monitor process and interpret production schedule by comparing production data with specifications
  • Record, categorise and explain problems, faults and down times related to process
  • Collect data, analyse it for trends and identify opportunities for continuous improvement, then record changes to operational settings for repeatability 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively
  • Communicate with team members to ensure continuous production
  • Request or instruct workgroup members and associated people to co-ordinate and effect process activities 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically
  • Control the production process, monitor machine efficiency, identify and implement improvement techniques
  • Explain metallurgical principles as they apply to the manufacturing process
  • Use a methodical approach to analysing test results 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems
  • Understanding of the impact of own actions on total production process
  • Solutions to problems reflect an awareness that process control forms the key to quality, output and cost effectiveness. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49403   Further Education and Training Certificate: Steel Tube and Pipe Manufacturing (Seamless Hot-Finished OR Welded OR Cold-Formed)  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2012-06-30  MERSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.