SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Order and ensure delivery from external suppliers for plastics manufacturing processes 
SAQA US ID UNIT STANDARD TITLE
119168  Order and ensure delivery from external suppliers for plastics manufacturing processes 
ORIGINATOR
SGB Plastics Manufacturing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 5  Level TBA: Pre-2009 was L5 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
In order for me to perform effectively in the field of plastics manufacturing, I will be able to:
  • Plan for, order and monitor the inbound supply of materials and consumables.
  • Take appropriate corrective action where required.
  • Report on the effectiveness of the supply chain.

    I will also know and understand:
  • The basic principles of supply chain management.
  • Techniques and procedures for ensuring supply.

    I can be assessed against this unit standard in the context of any volume plastics manufacturing process, e.g.
  • Injection moulding.
  • Blow moulding.
  • Various kinds of extrusion.
  • Variations of thermoforming.
  • Rotational moulding.
  • Calendaring.
  • Compression and related moulding processes.
  • Reaction injection moulding.
  • Polymer composites fabrication processes such as pultrusion, filament winding and resin injection.

    The volume production process also includes the regeneration of recycled materials and the manufacture of intermediate products such as sheet, profiles, compounds and master batches.

    The skill, knowledge and values reflected in this unit standard form part of the exit level outcomes required for the National Certificate in Plastics Manufacturing NQF Level 5. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The credits for this unit standard assume that I have a National Certificate in Plastics Manufacturing NQF Level 4 or an equivalent qualification. They also assume that I am working towards my qualification as part of a learning programme which integrates all the required unit standards.

    My learning time will increase if I do not have:
  • A relevant NQF 4 qualification.
  • Experience in a relevant field.

    My learning time will be decreased if I have experience in this field because:
  • My learning programme will be adjusted to build on what I already know.
  • I can apply to have that prior learning recognised. 

  • UNIT STANDARD RANGE 
    Learners who are involved in ordering materials and consumables and ensuring their delivery from external suppliers require the skills, values and knowledge reflected in this unit standard.

    The scope and level of this unit standard is indicated by range statements related to the specific outcomes.

    The learner should be able to work autonomously. The work will be guided by relevant worksite procedures, manufacturers' specifications and safety, health and environmental legislation. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Determine requirements; plan logistics and order-required materials. 
    OUTCOME RANGE 
    Materials include consumables, components, raw materials, packaging, labels, safety equipment.

    Order includes sourcing requirements, obtaining quotations. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment.
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).

    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 2 
    Prepare for delivery and monitor delivery and storing of materials. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment.
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).

    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 3 
    Complete delivery documentation and complete documentation for processing payments. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment.
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).

    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 4 
    Identify deviations, determine their causes and take corrective action. 
    OUTCOME RANGE 
    Deviations include incorrect quantities, sizes, types.

    Corrective actions include alternative methods of supply, returns, finding alternative suppliers. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment.
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).

    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 5 
    Communicate with suppliers, resolve issues and maintain and improve customer-supplier relationships. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment.
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).

    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 6 
    Measure performance and report on the effectiveness and efficiency of the suppliers. 
    OUTCOME RANGE 
    Measure performance includes measurements to evaluate supplier reliability, on-time delivery, flexibility, capacity, quality. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Delivery of materials and consumables meets production requirements. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Results achieved. 

    ASSESSMENT CRITERION 2 
    System for controlling ordering and delivery of materials and consumables is maintained. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Results achieved. 

    ASSESSMENT CRITERION 3 
    Agreed levels of inventory are maintained. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator. 

    ASSESSMENT CRITERION 4 
    No delays are caused as a result of poor or inadequate planning or control. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator. 

    ASSESSMENT CRITERION 5 
    Correct quantities and types of materials are delivered. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator. 

    ASSESSMENT CRITERION 6 
    Orders, documents and reports are legible, accurate and properly stored. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator. 

    ASSESSMENT CRITERION 7 
    Reports are timeously circulated and discussed with affected parties. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator. 

    ASSESSMENT CRITERION 8 
    Applicable safety, health and environmental policies and procedures are adhered to. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator. 

    ASSESSMENT CRITERION 9 
    Discussions on issues raised demonstrate an understanding of the key concepts and principles related to this activity and an understanding of how these relate to application in practice. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Understanding confirmed. 
    ASSESSMENT CRITERION RANGE 
    Issues, key concepts and principles include:
  • Transport methods.
  • Effect and cost of emergency measures and legislation.
  • Infrastructure constraints.
  • Movement of hazardous material.
  • Supplier relationships.
  • Health, safety and environmental issues.
  • Application of the principles of procurement, logistics, inventory, supply chain management.
     


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    To obtain credits I must be assessed. The assessment will be based on evidence that I produce. My assessment will be governed by the policies and guidelines of a relevant Education and Training Quality Assurance body (ETQA), which has jurisdiction over this field of learning. The policies and procedures of the relevant ETQA will also determine:
  • How my assessment is moderated.
  • How I can appeal against the outcome of the assessment.

    Any institution or company which offers learning that will enable me to achieve the purpose of this unit standard must be accredited as a provider through the relevant ETQA.

    My assessment against this standard should meet all the requirements of established principles. It should include practical assessment activities, which are appropriate to the contents of this unit standard. These activities should include an appropriate combination of self and peer assessment, practical and oral assessments, observations, etc.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.
    I will be assessed on all the specific outcomes, critical cross-field outcomes and essential embedded knowledge. The specific outcomes must be assessed in their own right, through oral and practical evidence. My assessment will not only be based on observation but also on other evidence which I compile into a portfolio of evidence. I cannot be assessed only through a written or oral test.

    The specific outcomes and essential knowledge will be assessed in relation to each other. If I am able to explain the items which fall under the heading of essential embedded knowledge, but am unable to perform the specific outcomes, then I cannot be assessed as 'competent'. Similarly, if I am able to perform tasks described under the specific outcomes, but cannot explain or justify them in terms of the fundamental concepts, principles and practice relevant to the level of the unit standard that underpins my skill, then I cannot be assessed as 'competent'.

    I will also be assessed on my ability to apply the principles and techniques related to the critical cross-field outcomes, not only in terms of what I can demonstrate, but also in terms of what I know and can discuss.

    My assessment for this unit standard can be done in conjunction with the assessment of other unit standards related to a qualification, and even in conjunction with my assessment for the qualification as a whole. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following items reflect the type of knowledge that the assessor will evaluate:

    1. Names and functions of:
  • Materials and consumables.
  • Packaging, labels, safety equipment.
  • Procurement, inventory, logistics, supply and value chain concepts.
  • Management systems including software.

    2. Purpose of:
  • Housekeeping.
  • Maintaining inventory records.
  • Maintaining and managing stock levels.
  • Range of documents utilised.
  • Contingency plans.
  • Tracking and monitoring.
  • Procurement, inventory, logistics, supply and value chains.

    3. Attributes, descriptions, characteristics and properties:
  • Different distribution channels.
  • Materials and consumables.
  • Packaging, labels, safety equipment.
  • Supply chains.
  • Costs.

    4. Processes and events:
  • Planning.
  • Procurement.
  • Delivery.
  • Incorrect or late supply of materials.

    5. Causes and effects, implications of:
  • Implications of poor supplier relationships.
  • Implications of incorrect or inadequate control over external suppliers.
  • Low levels of inventory.
  • Incorrect materials.
  • Poor planning, logistics and inventory practices.

    6. Procedures and techniques:
  • For ordering.
  • For ensuring delivery.
  • Authorising payments.
  • Managing the supply chain.
  • Managing costs.

    7. Regulations, legislation, agreements, policies, standards:
  • Applicable company policies and procedures.
  • Health, safety and environmental requirements related to transport and storage.

    8. Theory: rules, principles, laws:
  • Applicable statistical concepts and tools.
  • Stock rotation.
  • Applicable calculation formulae.
  • Procurement, inventory, logistics, supply and value chain principles, including management principles.

    9. Relationships, systems:
  • Relationship between planning, supply chain management, materials availability and production output.
  • Relationship between demand and supply chains. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify deviations in materials supply, alert affected parties and implement corrective action. 

    UNIT STANDARD CCFO WORKING 
    Work with suppliers to establish sound relationships. 

    UNIT STANDARD CCFO ORGANISING 
    According to procedures, following regular, consistent methodical work patterns. 

    UNIT STANDARD CCFO COLLECTING 
    Collect and analyse production information influenced by external suppliers. 

    UNIT STANDARD CCFO COMMUNICATING 
  • Communicate with production and external suppliers.
  • Communicate relevant corrective actions timeously with affected parties. 

  • UNIT STANDARD CCFO SCIENCE 
    Use appropriate methods to plan and monitor delivery of external supplies. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Relationship between materials availability and production output. 

    UNIT STANDARD ASSESSOR CRITERIA 
    My assessor will be registered and have a plastics manufacturing qualification at NQF 6 or higher. In the absence of assessors with such qualifications, the ETQA can make interim arrangements. My assessor should also be active in the industry and be familiar with the materials, machinery, products and level of technology in which I have contextualised my skills and knowledge. 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  36153   National Certificate: Polymer Composite Fabrication  Level 4  Level TBA: Pre-2009 was L4  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  58025   National Certificate: CNC Production Machining  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  49448   National Certificate: Plastics Manufacturing  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  57122   National Certificate: Printing and Manufacture of Packaging  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered" 
    2015-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.