SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Select, use and care for engineering measuring equipment 
SAQA US ID UNIT STANDARD TITLE
12476  Select, use and care for engineering measuring equipment 
ORIGINATOR
SGB Vehicle Maintenance 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2026-06-30   2029-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The skills, values and knowledge reflected in this unit standard are required by people in the field of engineering.

The learning outcomes in this unit standard also contribute to the exit level outcomes required for various NQF level 2 engineering qualifications.

Qualifying learners can identify units of measure commonly accepted within the engineering industry, know the correct symbols and select, safely use and maintain a range of engineering measuring equipment. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as the start of a progression.

The credits allocated to this unit standard assume that a learners has already learned to:
  • Maintain a safe and productive work area 

  • UNIT STANDARD RANGE 
    The scope and level of this unit standard is determined by the ranges as indicated under the specific outcomes.

    All work is performed under supervision. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain and discuss basic units of measure and symbols. 
    OUTCOME NOTES 
    Identify symbols with international units of measure 
    OUTCOME RANGE 
    Basic units of measure include length, mass, temperature, angle, pressure 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Basic units of measure, symbols and derived units of measure are explained and discussed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 2 
    2. Measuring equipment used as recommended by the manufacturer to meet job/task requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 3 
    3. Measurements are taken and recorded. 
    ASSESSMENT CRITERION NOTES 
    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 4 
    4. Unsafe/faulty measuring equipment identified and corrective action taken. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 5 
    5. Measuring equipment cleaned, serviced, maintained and stored. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • SPECIFIC OUTCOME 2 
    Select and use engineering measuring equipment. 
    OUTCOME NOTES 
  • Obtain measurement and revalidate by re-measurement using alternative or same device
  • Record measurements using appropriate symbols and units 
  • OUTCOME RANGE 
    Measuring equipment includes verniers, callipers, tapes, rules, combination set, spirit level, plumb bob, micrometers, dial gauges, feeler gauges, thermometers, scales, go/no go gauges, thread gauges, pressure gauges. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Basic units of measure, symbols and derived units of measure are explained and discussed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 2 
    2. Measuring equipment used as recommended by the manufacturer to meet job/task requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 3 
    3. Measurements are taken and recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 4 
    4. Unsafe/faulty measuring equipment identified and corrective action taken. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 5 
    5. Measuring equipment cleaned, serviced, maintained and stored. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • SPECIFIC OUTCOME 3 
    Care for and maintain measuring equipment. 
    OUTCOME NOTES 
  • Identify and report unsafe or faulty measuring equipment
  • Clean, service, maintain and store measuring equipment 
  • OUTCOME RANGE 
  • Damaged or faulty measuring equipment includes deformities, breakages, stickiness, not zeroing, missing parts, expired calibration.
  • Maintenance of measuring equipment includes oiling, setting and calibration. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Basic units of measure, symbols and derived units of measure are explained and discussed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 2 
    2. Measuring equipment used as recommended by the manufacturer to meet job/task requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 3 
    3. Measurements are taken and recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 4 
    4. Unsafe/faulty measuring equipment identified and corrective action taken. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 5 
    5. Measuring equipment cleaned, serviced, maintained and stored. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • SPECIFIC OUTCOME 4 
    Recognise and report problems, changes and/or malfunctions while working. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Basic units of measure, symbols and derived units of measure are explained and discussed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 2 
    2. Measuring equipment used as recommended by the manufacturer to meet job/task requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 3 
    3. Measurements are taken and recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 4 
    4. Unsafe/faulty measuring equipment identified and corrective action taken. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 5 
    5. Measuring equipment cleaned, serviced, maintained and stored. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • SPECIFIC OUTCOME 5 
    Work safely with due care for self, fellow workers, equipment, materials and the environment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Basic units of measure, symbols and derived units of measure are explained and discussed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 2 
    2. Measuring equipment used as recommended by the manufacturer to meet job/task requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 3 
    3. Measurements are taken and recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 4 
    4. Unsafe/faulty measuring equipment identified and corrective action taken. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 

  • ASSESSMENT CRITERION 5 
    5. Measuring equipment cleaned, serviced, maintained and stored. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Measurements taken are appropriate to scale of measuring device
    2. Symbols used are relevant to measurement
    3. Appropriate measuring equipment selected for job
    4. Problems are reported timeously to appropriate personnel
    5. A clean and tidy work environment is maintained

    Understanding confirmed:

    Explain and discuss:
  • Consequences of using incorrect measuring equipment
  • Consequences of incorrectly using measuring equipment, e.g. injuries
  • Choice of particular equipment for job/task
  • Consequences of improper care and storage of measuring equipment 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    The assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assuror who has jurisdiction over this field of learning. The assessor will (at the very least) be accredited and have a technical qualification in this learning area.

    The learner can be assessed in the language of his/her choice although s/he has to report incidents or conditions to someone else. The learner will be assessed on his/her ability to report in the language commonly used in his/her working environment.

    The learner will be assessed in the workplace but s/he can submit documents, projects, test results and assignments that were not produced in the workplace.

    The learner can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names & functions of:
  • Personal protective equipment
  • Measuring equipment

    Attributes, descriptions, characteristics & properties:
  • Units of measure
  • Symbols

    Purpose of:
  • Various measuring equipment
  • Cleaning and care of measuring equipment

    Processes, events, causes and effects, implications:
  • Causes of injury and damage to materials
  • Implications of incorrect or inappropriate use of tools

    Procedures and techniques
  • Safety
  • Storage
  • Cleaning
  • Maintenance
  • Use of various hand tools

    Regulations, legislation, agreements, policies, standards
  • Applicable safety, health and environmental protection legislation and standards

    Theory: rules, principles, laws
  • Basic concepts of density, leverage, force, pressure and torque

    Relationships, systems:
  • Role of measuring equipment in the engineering process 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Apply the correct procedures for using, storing and looking after measuring equipment 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Use the common names for measuring equipment and the procedures and processes associated with their use
  • Report on faulty or unsafe measuring equipment 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Understand and explain basic concepts of measurement 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Relate the use of measuring equipment to the engineering process 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  49402   National Certificate in Steel Tube and Pipe Manufacturing (Seamless Hot-Finished OR Welded OR Cold-Formed)  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2012-06-30  MERSETA 
    Core  65809   National Certificate: Automotive Manufacturing and Assembly  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Core  78523   National Certificate: Automotive Repair and Maintenance  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  57878   National Certificate: CNC Production Machining  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Core  65129   National Certificate: Diesel Electric and Electric Fitting  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  58860   National Certificate: Electro-Mechanical Winding  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Core  58269   National Certificate: Electro-Mechanics  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  58722   National Certificate: Engineering Fabrication  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  22869   National Certificate: Engineering Fabrication  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2007-08-16  MERSETA 
    Core  58268   National Certificate: Lift Installation and Maintenance  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Core  59689   National Certificate: Mechanical Engineering  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  23273   National Certificate: Mechanical Engineering: Fitting  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2008-06-25  MERSETA 
    Core  23254   National Certificate: Mechanical Engineering: Fitting and Machining  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2008-06-25  MERSETA 
    Core  23277   National Certificate: Mechanical Engineering: Machining  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2008-06-25  MERSETA 
    Core  59729   National Certificate: Mechanical Handling (Rigging)  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  22770   National Certificate: Mechatronics  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2009-07-29  Was MERSETA until Last Date for Achievement 
    Core  67629   National Certificate: Mechatronics  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Core  58718   National Certificate: Metals Processing  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Core  36154   National Certificate: Polymer Composite Fabrication  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Core  24215   National Certificate: Thermoplastic Fabrication  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Core  57881   National Certificate: Welding Application and Practice  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  59099   National Certificate: Agricultural Equipment Service and Repair  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  AgriSETA 
    Elective  49689   National Certificate: Automotive Repair and Maintenance  Level 2  NQF Level 02  Passed the End Date -
    Status was "Registered" 
    2008-11-30  Was MERSETA until Last Date for Achievement 
    Elective  58781   National Certificate: Production Technology  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  24455   National Certificate: Servicing Vehicles  Level 2  NQF Level 02  Passed the End Date -
    Status was "Registered" 
    2005-11-30  Was MERSETA until Last Date for Achievement 
    Elective  50542   National Certificate: Small Craft Construction  Level 2  NQF Level 02  Passed the End Date -
    Status was "Registered" 
    2009-08-31  Was MERSETA until Last Date for Achievement 
    Elective  59017   National Certificate: Tissue Conversion  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2015-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. MSC Artisan Academy (Pty) Ltd T/A Master Artisan Academy SA (EAST LOND 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.