SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Install, test and maintain a complex computer integrated manufacturing system 
SAQA US ID UNIT STANDARD TITLE
13114  Install, test and maintain a complex computer integrated manufacturing system 
ORIGINATOR
SGB Food 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 5  Level TBA: Pre-2009 was L5  20 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The skills, values and knowledge reflected in this unit standard are required by people in the field of mechatronics. The learning outcomes in this unit standard also contribute to the exit level outcomes required for the mechatronics NQF level 5 qualification.

Qualifying learners can install, test and maintain a complex CIM system to conform to company specific requirements. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed to be as part of a progression. It is one of a series of unit standards for activities at and above this level. The credits assigned to it are based on the assumption that the learner is learning what is needed for this unit standard as part of his/her learning for a range of related unit standards at this level. 

UNIT STANDARD RANGE 
  • The scope and level of this unit standard is determined by the ranges as indicated under the specific outcomes.
  • The learner should be able to work autonomously and as part of a self-directed work team. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Read and interpret CIM system installation diagrams. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. System installed and working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. CIM system programmed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Inspections carried out and recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 4 
    4. Repairs undertaken. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 5 
    5. Tests and measurements recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 2 
    Identify, select, install and integrate CIM sub-systems. 
    OUTCOME RANGE 
    Process includes electrical, pneumatic, electronic, robotic, information technology; energy and data lines; compatibility between sub systems; local area networks, hardware and software compatibility. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. System installed and working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 2 
    2. CIM system programmed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 3 
    3. Inspections carried out and recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 4 
    4. Repairs undertaken. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 5 
    5. Tests and measurements recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • SPECIFIC OUTCOME 3 
    Test, measure and record information. 
    OUTCOME RANGE 
    Testing, measuring and recording of information includes electrical and pneumatic data and simulation tests 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. System installed and working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. CIM system programmed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Inspections carried out and recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 4 
    4. Repairs undertaken. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 5 
    5. Tests and measurements recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 4 
    Programme CIM systems. 
    OUTCOME NOTES 
  • Evaluate different implications of control
  • Enter, edit and test programmes
  • Monitor programme execution and eliminate faults 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. System installed and working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. CIM system programmed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Inspections carried out and recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 4 
    4. Repairs undertaken. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 5 
    5. Tests and measurements recorded. 
    ASSESSMENT CRITERION RANGE 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task.
     

  • SPECIFIC OUTCOME 5 
    Maintain complex CIM systems. 
    OUTCOME NOTES 
  • Inspect CIM sub-systems
  • Check functions of safety devices and log tests
  • Follow maintenance procedures
  • Replace components subject to wear/failure
  • Eliminate software errors
  • Repair in accordance to operational sequences
  • Adjust in accordance to changes in operational conditions
  • Use diagnostic and maintenance systems 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. System installed and working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. CIM system programmed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Inspections carried out and recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 4 
    4. Repairs undertaken. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 5 
    5. Tests and measurements recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 6 
    Work safely with due care for self, fellow workers, machines, equipment, materials and environment. 
    OUTCOME NOTES 
    6. Work safely with due care for self, fellow workers, machines, equipment, materials and the environment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. System installed and working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. CIM system programmed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Inspections carried out and recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 4 
    4. Repairs undertaken. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 5 
    5. Tests and measurements recorded. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Correct components are selected and used
  • Software and hardware are correctly installed
  • Test equipment used correctly
  • Appropriate documentation used
  • Worked and communicated as part of a team
  • Safe working practices are adhered to
  • Correct tools are selected and used
  • Break down time is kept to a minimum if at all
  • Quality of process meets standards
  • A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • Processes and operational sequences
  • Proportional CIM sub-systems
  • System configurations
  • Compatibility of hardware and software components and sub-systems
  • Parameterisation
  • Diagnostic procedures
  • Test procedures
  • Safety
  • Maintaining quality and systems
  • Break down analysis
  • Improving and upgrading processes and quality
  • Fault finding principles

    Discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    My assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality
    Assuror who has jurisdiction over this field of learning. My assessor will (at the very least) be accredited and have a technical qualification in this learning area.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.

    I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were not produced in the workplace.

    I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names and functions of:
  • Proportional CIM sub-systems
  • Test equipment, diagnostic software
  • Processes and operational sequences
  • Quality requirements
  • Break down time analysis
  • Reports and relevant documentation

    Attributes, descriptions, characteristics and properties:
  • System configurations
  • Compatibility of hardware and software components
  • Timing signals and behaviour
  • Parameterisation
  • Compatibility of sub-systems

    Sensory cues:
  • Use of senses to detect faulty components
  • Use of sight to read data

    Purpose of:
  • Sub systems and components
  • Operational sequences
  • Quality processes
  • Maintenance schedules
  • Software and hardware upgrades
  • Simulation
  • Diagnostic procedures
  • Communication processes

    Processes, events, causes, effects and implications:
  • Causes of breakdowns
  • Implications of incorrect diagnosing of faults
  • Implication of not following quality processes

    Procedures and techniques:
  • Maintenance procedures
  • Testing procedures
  • Application of testing programs
  • Quality procedures

    Regulations, legislation, agreements, policies, standards:
  • Control processes and standards
  • Applicable safety, health and environmental protection legislation and standards

    Theory: rules, principles, laws:
  • Principles of control processes
  • Principles of fault finding principles
  • Programming rules
  • Safety standards
  • Maintenance

    Relationship systems:
  • Relationship between sub-systems and CIM systems
  • Relationship between installation of CIM systems and production
  • Relationship between production and quality
  • Relationship between production and maintenance 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Recognise situations that require corrective action 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others:
  • Contribute to workgroup efforts to maintain cleanliness, safety and quality
  • Contribute to working in groups to determine a solution to an identified problem 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Apply correct procedures for using, storing and caring for test equipment, tools, maintenance, quality and CIM systems 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Use common names for system components
  • Use common names for test equipment
  • Communicate with peers and management
  • Fill in the necessary fault reports and material requisition forms 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology:
  • Principles of electricity
  • Mechanical technology
  • Principles of process control
  • Information technology 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Relate the installation and maintenance of CIM systems to production and quality 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  22773   National Certificate: Mechatronics  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered" 
    2011-02-16  Was MERSETA until Last Date for Achievement 
    Core  79627   National Certificate: Mechatronics  Level 5  NQF Level 05  Passed the End Date -
    Status was "Reregistered" 
    2015-06-30  MERSETA 
    Elective  48730   National Certificate: Maintenance of High-speed Production Processes (Fast-moving Consumer Goods)  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered" 
    2015-06-30  FOODBEV 
    Elective  48765   National Diploma: Maintenance of High-speed Production Processes (Fast-moving Consumer Goods)  Level 5  NQF Level 05  Passed the End Date -
    Status was "Reregistered" 
    2015-06-30  FOODBEV 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.