SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Operate truck-mounted cranes 
SAQA US ID UNIT STANDARD TITLE
242978  Operate truck-mounted cranes 
ORIGINATOR
SGB Transport and Logistics Operations 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 11 - Services Transport, Operations and Logistics 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  8 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The person credited with this unit standard will be able to understand the functions of a truck mounted crane while using the crane in a safe and suitable manner. They will also be able to access support and emergency services in the case of an incident or accident in the workplace.

The qualifying learner is capable of:
  • Demonstrating knowledge of the functions of a truck mounted crane.
  • Identifying the safety and suitability of the crane.
  • Inspecting and recording the operational fitness of the components of the truck and crane.
  • Operating a truck mounted crane.
  • Accessing available support systems and emergency services in case of incidents and accidents. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners accessing this unit standard are competent in:
  • Communication at NQF Level 2 or equivalent.
  • Mathematical Literacy at NQF Level 2 or equivalent. 
    		•

    UNIT STANDARD RANGE 
  • Limited to work carried out on a truck-mounted crane with standardised fittings.
  • The applied competence expressed in this standard covers one specific crane of a range of heavy crane types (capacity and functionality) used in familiar operational functions in any industry context, and in a range of environmental conditions (e.g. poor weather).
  • Cranes shall include:
    > C32 Truck mounted Crane.
  • Attachments shall include:
    > S Tandem Lifts.
    > T Special Categories.
  • The Codes and Attachments correspond with the National Code of Practice. 
    		•

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of the functions of a truck mounted crane. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The main functions of truck mounted crane's are explained in terms of manufactures specifications. 

    ASSESSMENT CRITERION 2 
    The operation of all major components is explained in terms of their functions. 

    ASSESSMENT CRITERION 3 
    All safety features and warning devices on the crane are identified, and their purposes explained in accordance with manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    The maximum operating capacities are explained in terms of the designed crane capabilities. 

    ASSESSMENT CRITERION 5 
    Warnings from crane indicators and gauges are explained according to manufacturer's specifications. 

    ASSESSMENT CRITERION 6 
    Corrective actions are identified and explained in terms of neutralising warnings received. 

    SPECIFIC OUTCOME 2 
    Identify the safety and suitability of the crane. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The suitability of the crane is identified in accordance with its purpose prior to utilisation. 

    ASSESSMENT CRITERION 2 
    The operational capability of lifting equipment is assessed according to Safe Work Load of slings. 

    ASSESSMENT CRITERION 3 
    The influence of load/range is identified according to Load/range characteristics, manufacturers' requirements and environmental conditions. 

    ASSESSMENT CRITERION 4 
    Safety procedures are identified according to crane safety requirements. 

    ASSESSMENT CRITERION 5 
    A truck mounted crane is operated in compliance with statutory regulations. 

    SPECIFIC OUTCOME 3 
    Inspect and record the operational fitness of the components of the truck and crane. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Pre-operational checks are carried out according to appropriate checklist. 

    ASSESSMENT CRITERION 2 
    Daily and weekly operator maintenance is performed according to the appropriate post-operational checklist and recorded using a logbook. 

    ASSESSMENT CRITERION 3 
    Checklist is completed according to worksite procedures and corrective action taken to ensure that it complies with manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    Appropriate measures are identified and used to rectify and/or prevent basic faults and defects in the mechanical function of the crane. 

    SPECIFIC OUTCOME 4 
    Operate a Truck Mounted crane. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The purpose and functions of the various controls are explained in accordance with their designed use and manufacturers specifications. 

    ASSESSMENT CRITERION 2 
    Controls are used to manoeuvre the crane within manufacturer's specifications. 

    ASSESSMENT CRITERION 3 
    Crane performance is monitored and corrective action is taken when necessary, in accordance with manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    Crane is operated without risk of damage, loss to machine, property, or injury to people. 

    ASSESSMENT CRITERION 5 
    Hazards specific to operating truck mounted crane's are explained and ways to minimise these hazards are explained in terms of potential damage to machine, property, and injury to people. 

    ASSESSMENT CRITERION 6 
    Start-up and shutdown procedures are followed according to manufacturer's specifications. 

    ASSESSMENT CRITERION 7 
    Machine is parked according to manufacturer's and company requirements. 

    SPECIFIC OUTCOME 5 
    Access available support systems and emergency services in case of incidents and accidents. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The most appropriate course of action in relation to the purpose of the various controls is explained in accordance with their designed use. 

    ASSESSMENT CRITERION 2 
    The most appropriate course of action in relation to potential hazards in the workplace is explained according to emergency procedures. 
    ASSESSMENT CRITERION RANGE 
    Hazards may include but are not limited to: access, obstructions, field of vision, communications, travel route, unauthorized people, insecure loads, unstable loads, unknown loads, nature of loads.
     


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An individual wishing to be assessed (including through RPL) against this unit standard may apply to an assessment agency, assessor or provider institution accredited by the relevant ETQA.
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard or assessing this unit standard must be accredited as a provider with the relevant ETQA.
  • Moderation of assessment will be conducted by the relevant ETQA at its discretion. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:
  • The differences in range, structure, function and capacity of truck-mounted cranes.
  • The requirement for certification which verifies the safety of the crane, as defined in legislation (Driven Machinery Regulation 18) by a "competent authority".
  • The pre-operational and operational and 'close down' checks for the components of the specific truck-mounted crane.
  • The principles of lifting weights and the variances of safe capacities according to Manufacturer's specifications.
  • Safe and correct slinging methods that can be used with load types normally dealt with by truck-mounted cranes. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems using critical and creative thinking when analyzing the load capacity with the load and range charts to ensure the correct selection of lifting equipment, for a safe lifting operation. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate knowledge of various load weight, size and type for the purpose of selecting and utilising the most appropriate (safe and efficient) method of operating. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate initiative in selecting the most appropriate gear and equipment dependent on crane types, freight characteristics and environmental conditions. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  61809   National Certificate: Tyre Repair and Maintenance  Level 2  NQF Level 02  Reregistered  2023-06-30  MERSETA 
    Elective  48794   National Certificate in Quality Checking of Tyres and Tyre Components  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  71989   National Certificate: Automotive Components: Manufacturing and Assembly  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  58862   National Certificate: Electro-Mechanical Winding  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  58720   National Certificate: Engineering Fabrication  Level 3  NQF Level 03  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  64829   National Certificate: Lifting Machine Operations  Level 3  NQF Level 03  Reregistered  2023-06-30  TETA 
    Elective  23255   National Certificate: Mechanical Engineering: Fitting and Machining  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  91926   National Certificate: Mechanical Engineering: Machining and Tooling  Level 3  NQF Level 03  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  67609   National Certificate: Mechatronics  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  79666   National Certificate: Metal and Engineering Manufacturing Processes  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  64190   National Certificate: Metals Production  Level 3  NQF Level 03  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  49449   National Certificate: Plastics Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  36155   National Certificate: Polymer Composite Fabrication  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  79407   National Certificate: Polymer Compound Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  21012   National Certificate: Power and Telecommunication Cable Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  24217   National Certificate: Thermoplastic Fabrication  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  48798   National Certificate: Tyre and Tyre Component Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  48795   National Certificate: Tyre Assembly  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  57886   National Certificate: Welding Application and Practice  Level 3  NQF Level 03  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. 123 Mulani Investment 
    2. AA Forklift Training Centre 
    3. AA Technical Services PTY LTD 
    4. AAH Skills and Development 
    5. Accredited Training 
    6. AETA Training Solutions 
    7. Africa Training Centre 
    8. Agisanang SA Training 
    9. Alika Investment CC 
    10. AMA Training Skills Devleopment Centre 
    11. Arcelor Mittal Steel Vanderbijlpark 
    12. Aveng (Africa) Limited 
    13. Babcock Plant Services Pty Ltd 
    14. Bakubung Driver Training and consultants CC 
    15. Bee-Safe Programme Development and Training (Pty) Ltd 
    16. Best Hope Academy & Consultancy 
    17. Bev Short Training Consultants 
    18. Big J Training Academy 
    19. Biz and Labour (Pty) Ltd 
    20. Bonticom (Pty) Ltd 
    21. BreErivier Training Development CC Mossel Bay 
    22. BreErivier Training Development CC Worcester 
    23. Bridgestone South Africa (Pty) Ltd - Isando Branch (ISANDO) (TP) 
    24. Circleway College 
    25. Continuous Development Training 
    26. Culmen Consultants cc 
    27. Day-To-Day Quality Equipments Training 
    28. Dee-Bravo Training Centre 
    29. Dees Driver Training Centre 
    30. Diversity technology Training Institute 
    31. DMG Global Training Solutions (Pty) Ltd 
    32. DOD School of Logistics Training 
    33. Driven Machinery Training Services cc 
    34. Driving Sense 
    35. Dynalift cc 
    36. Econo Driver Training 
    37. Edidor 196 Pty Ltd 
    38. Educon Training and Development PTY LTD 
    39. Edutech Training (Pty) Ltd 
    40. ESS Holdings (PTY) Ltd 
    41. Excellect 209 PTY LTD 
    42. Exclusive Training Services 
    43. Exodec 388 CC 
    44. Fantique Trade 1092 
    45. Fost Training Pty (Ltd) 
    46. Goldee Trading Academy 176 
    47. Goodwill Training Skills 
    48. H and L Training School 
    49. Harvestine Investments 
    50. He and She Driver Training Centre 
    51. Humrec Human Resource Training 
    52. Ikaheng HR Solutions Pty Ltd 
    53. Ikusasa Lethu Projects and Training (Pty) Ltd 
    54. Immenent HR Solutions CC 
    55. Impact Skills Development (Pty) Ltd 
    56. Indaba Training 
    57. Inkqubela Consultants 
    58. Innovative Shared Services 
    59. Intellectual Technical Training Institute 
    60. Interlink Technical Training 
    61. Juan-Tech Rentals Pty Ltd 
    62. Kempston Driving Academy 
    63. Khabanyane Training and development 
    64. Kholwa Management and training Consultancy 
    65. Koedoespoort Training Centre 
    66. Kriel Training (PTY) LTD 
    67. KSV Marketing and business services Pty Ltd 
    68. LB Training Solutions 
    69. Learning Exchange Pty Ltd 
    70. LEFA Training and Projects 
    71. Lehway Safty Training and Risk Management 
    72. Leibrandt Training Academy CC 
    73. Licence Wise 
    74. Lifting Operator Training Centre cc 
    75. LTM Training and Remote Learning Solutions 
    76. M AND C ACADEMY AND CONSULTANCY PTY LTD 
    77. Magas Training and Development (Pty) Ltd 
    78. Makwedeng Training 
    79. Marholeni M Trading Enterprize 
    80. Masakhane Further Education and Training 
    81. Masifundeni Training (PTY) LTD 
    82. Mediro Training Academy 
    83. Mkholo Pardon Training Institution 
    84. MMTI Holdings 
    85. Mobile Training cc 
    86. Modern Technical College FET 
    87. Ndwamato Training Solutions PTY LTD 
    88. NOSA LOGISTICS PTY LTD 
    89. NOSHTAC Training and Consulting cc 
    90. Nowethu Learning Institute cc 
    91. Orion Industrial Training Services (Pty) Ltd 
    92. OSR Trading 
    93. Precision skills development and training 
    94. Pro - Con Skills Centre 
    95. PRO Skills Development Pty Ltd 
    96. Protrain Solutions 
    97. QMS Training 
    98. RCH Investments (Pty) Ltd 
    99. Rhino Recruiting Services CC 
    100. RM Chain Hoists 
    101. Samancor Chrome Limited 
    102. Shipping And Transport College Pty Ltd 
    103. Sisabenza Operator Training (PTY) LTD 
    104. SKILLS DYNAMICS AFRICA PTY LTD 
    105. Skills for All 
    106. Solly''''s SkillsTraining Centre 
    107. Starcrow 36 Bk 
    108. Striving Mind Academy and Consultancy Pty Ltd 
    109. SVA Training 
    110. The Skills Authority 
    111. The Skills Matrix 
    112. Tholulwazi Advanced Training Center 
    113. TIRHANI SKILLS FOR AFRICA 
    114. Toyota Forklift t/a Saficon Industrial Equipment 
    115. Training at Divine Group Pty Ltd 
    116. Transnet Academy - Faculty of Maritime 
    117. Transvaal Legislative Training 
    118. TRENTYRE (Spartan)(TP) 
    119. Truck Crane Training Specialists 
    120. True-Blue Training (Pty) Ltd 
    121. Tshireletso Multi-skills and Training 
    122. Tunivision (Pty) Ltd 
    123. Uzoyithola Training and Consulting 
    124. Value Logistics Limited 
    125. Vhonisani Training Academy & Projects 
    126. Watch Tower Bible & Tract Society of SA 
    127. Wheelman S A 
    128. YouLearnIT Academy 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.