SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

De-rind and de-bone various pork cuts 
SAQA US ID UNIT STANDARD TITLE
243017  De-rind and de-bone various pork cuts 
ORIGINATOR
SGB Food 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
8886  Derind and debone various pork cuts  Level 2  NQF Level 02   

PURPOSE OF THE UNIT STANDARD 
This unit standard is intended for a person working in the meat processing industry who has the responsibility of de-rinding and de-boning various pork cuts using automated or semi-automated equipment.

A person credited with this unit standard is able to:
  • Demonstrate an understanding of the de-rinding and de-boning of various pork cuts.
  • Prepare for de-rinding and de-boning of various pork cuts.
  • De-rind and de-bone various pork cuts.
  • Perform relevant procedures after de-rinding and de-boning.

    Range:
  • Pork cuts refer to shanks, trotters, middles, bellies, breasts, legs and tails. Middles can include thick rib, rib, loin and chump.
  • The assessment criteria of this unit standard must be applied to all of the above-mentioned cuts.

    This unit standard will contribute to the full development of the learner within the meat processing industry by providing recognition, further mobility and transportability within the field of manufacturing and assembly. The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and contribute to the upliftment and economic growth within the meat processing industry. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in:
  • Communication and Mathematical Literacy at NQF Level 2.
  • Cleaning procedures, handling of cleaning equipment and chemicals.
  • Hygiene and food safety practices. 

  • UNIT STANDARD RANGE 
    In the context of this unit standard de-rinding and de-boning can include all automated or semi-automated de-rinding and de-boning equipment. The context of this unit standard is further clearly defined under the range statements contained within. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate an understanding of the de-rinding and de-boning of various pork cuts. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The purpose of de-rinding pork cuts is explained according to standard principles of meat processing. 

    ASSESSMENT CRITERION 2 
    The purpose of de-boning pork cuts is explained according to standard principles of meat processing. 

    ASSESSMENT CRITERION 3 
    The bone structures of the pork cuts intended for de-boning are identified according to standard principles of porcine anatomy. 

    ASSESSMENT CRITERION 4 
    The procedures for de-rinding the applicable pork cuts are described according to standard operating procedures. 

    ASSESSMENT CRITERION 5 
    The procedures for de-boning the applicable pork cuts are described according to standard operating procedures. 

    ASSESSMENT CRITERION 6 
    Food safety practices and procedures for de-rinding and de-boning of pork cuts are identified and explained according to standard food safety principles. 

    ASSESSMENT CRITERION 7 
    The equipment used for de-rinding and de-boning of pork cuts is identified and its operating principles are described according to standard operating procedures. 

    SPECIFIC OUTCOME 2 
    Prepare for de-rinding and de-boning of various pork cuts. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The purpose of each of the preparations performed prior to de-rinding and de-boning of pork cuts is explained according to standard principles of meat processing. 

    ASSESSMENT CRITERION 2 
    Personal preparation is done according to standard operating procedures. 
    ASSESSMENT CRITERION RANGE 
    Preparations include:
  • Hygiene practices.
  • Wearing of protective clothing and safety gear.
     

  • ASSESSMENT CRITERION 3 
    The work area and equipment are prepared according to standard operating procedures. 
    ASSESSMENT CRITERION RANGE 
    Preparation refers to cleaning, sanitising and pre-start up checks on the equipment.
     

    ASSESSMENT CRITERION 4 
    Pork cuts are received and maintained according to standard operating procedures. 
    ASSESSMENT CRITERION RANGE 
  • Receiving refers to sufficient quantity and checking if the pork cuts are quality released according to work-site requirements.
  • Maintaining refers to all the work-site requirements in order to maintain the optimum quality of the pork cuts.
     

  • ASSESSMENT CRITERION 5 
    Pork cuts are prepared for de-rinding and de-boning according to standard operating procedures. 

    SPECIFIC OUTCOME 3 
    De-rind and de-bone various pork cuts. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Pork cuts are de-rinded and de-boned according to standard operating procedures and safety requirements. 
    ASSESSMENT CRITERION RANGE 
    Pork cuts refer to all of shanks, trotters, middles, bellies, breasts, legs and tails. Middles can include thick rib, rib, loin and chump.
     

    ASSESSMENT CRITERION 2 
    Equipment is handled according to standard operating procedures and safety requirements. 

    ASSESSMENT CRITERION 3 
    Parameters and conditions during de-rinding and de-boning are monitored and controlled according to standard operating procedures. 

    ASSESSMENT CRITERION 4 
    Work areas are kept and maintained according to standard operating procedures. 

    ASSESSMENT CRITERION 5 
    De-rinded and de-boned pork cuts conform to specifications as set by standard operating procedures and company requirements. 

    SPECIFIC OUTCOME 4 
    Perform relevant procedures after de-rinding and de-boning. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    De-rinded and de-boned pork cuts are released for further processing according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    De-rinding and de-boning equipment is shut down according to standard operating procedures. 

    ASSESSMENT CRITERION 3 
    Sub-standard product is handled according to standard operating procedures. 

    ASSESSMENT CRITERION 4 
    Secondary products from the de-rinding and de-boning process are handled according to standard operating procedures. 

    ASSESSMENT CRITERION 5 
    The work area and equipment are cleaned and sanitised according to standard operating procedures. 

    ASSESSMENT CRITERION 6 
    Process records are kept and reports are done according to standard operating procedures. 

    ASSESSMENT CRITERION 7 
    Process-related problems are identified and solved within the scope of work. 
    ASSESSMENT CRITERION RANGE 
    Problem solving includes:
  • Recognition of signs of problems.
  • Identification and explanation of common problems, their causes and methods of prevention.
  • Description of the consequences of the problem.
  • Reporting of problems.
     


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor or moderator respectively with the relevant Education and Training Quality Assurance Body (ETQA), or with another ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant ETQA, or with another ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA, or by another ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal (provider-based) and external (ETQA-based) moderation of assessment, unless ETQA policies specify otherwise.
  • Assessment and moderation of assessment against this unit standard should encompass achievement of competencies described in the individual unit standard and may encompass achievement of integrated competencies with other unit standard(s).
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    N/A 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems in which response displays that responsible decisions, using critical and creative thinking, have been made by:
  • Solving process-related problems within the scope of work in order to ensure required product quality.

    Evident in Specific Outcome
  • Perform relevant procedures after de-rinding and de-boning. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team and/or group, by:
  • Performing all preparations and processing tasks in a team set-up.

    Evident in Specific Outcome
  • Prepare for de-rinding and de-boning of various pork cuts.
  • De-rind and de-bone various pork cuts.
  • Perform relevant procedures after de-rinding and de-boning. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities responsibly and effectively by:
  • Performing personal preparation, workplace, product and equipment preparation in order to operate process and equipment according to standard operating procedures.

    Evident in Specific Outcome
  • Prepare for de-rinding and de-boning of various pork cuts.
  • De-rind and de-bone various pork cuts. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information, by:
  • Keeping structured records.

    Evident in Specific Outcome
  • Perform relevant procedures after de-rinding and de-boning.
  • Demonstrating understanding of the de-rinding and de-boning process.

    Evident in Specific Outcome
  • Demonstrate an understanding of the de-rinding and de-boning of various pork cuts. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively by using mathematical and/or language skills in the modes of oral and/or written presentations by:
  • Keeping records.

    Evident in Specific Outcome
  • Perform relevant procedures after de-rinding and de-boning. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically, showing responsibility towards the environment and health of others, by:
  • Demonstrating understanding of and applying food safety practices and procedures.

    Evident in Specific Outcome
  • Demonstrate an understanding of the de-rinding and de-boning of various pork cuts.
  • De-rind and de-bone various pork cuts.
  • Cleaning and sanitising the equipment and work environment.

    Evident in Specific Outcome
  • Prepare for de-rinding and de-boning of various pork cuts.
  • Perform relevant procedures after de-rinding and de-boning. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem solving contexts do not exist in isolation, by:
  • Solving process-related problems within the scope of work in order to ensure required product quality.

    Evident in Specific Outcome
  • Perform relevant procedures after de-rinding and de-boning. 

  • UNIT STANDARD CCFO CONTRIBUTING 
    Contribute to the full personal development of each learner and the social and economic development of the society at large.

    Evident in Specific Outcome
  • Demonstrate an understanding of the de-rinding and de-boning of various pork cuts.
  • Prepare for de-rinding and de-boning of various pork cuts.
  • De-rind and de-bone various pork cuts.
  • Perform relevant procedures after de-rinding and de-boning. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 8886, "Derind and debone various pork cuts", Level 2, 3 credits.

    Supplementary Information:
  • Legal requirements:

    The following acts and/or codes, current and future regulations and amendments will be applicable.
  • Animal Diseases Act, No. 35 of 1984.
  • Foodstuffs, Cosmetics and Disinfectants Act, No. 54 of 1972.
  • Health Act, No. 63 of 1977.
  • Meat Safety Act, No. 40 of 2000.
  • Occupational Health and Safety Act, No. 85 of 1993.

    Where applicable, the following International and National Standards should be considered:
  • SANS 1049 - Food Hygiene Management.
  • SANS 10330 - Requirements for a HACCP system.
  • ISO 22000 - Food safety management systems - Requirements for organisations throughout the food chain.
  • ISO 9001 - Quality Management System - Requirements.
  • Definition of terms within this unit standard:

    Terminology:
  • Food safety, Clarification/explanation/definition: Assurance that food will not cause harm to the consumer when it is prepared and/or eaten according to its intended use. Food safety is related to the occurrence of food safety hazards and does not include other human health aspects related to e.g. malnutrition.
  • Pork cuts, Clarification/explanation/definition: Refers to shanks, trotters, middles, bellies, breasts, legs and tails. Middles can include thick rib, rib, loins and chump.
  • Standard operating procedures, Clarification/explanation/definition: Refer to company procedures, prescribed procedures from the manufacturer, personal safety and food safety practices and procedures, good manufacturing practices, best practices, applicable legislation, time frames, recipes and specifications. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  57880   National Certificate: Meat Processing  Level 3  NQF Level 03  Reregistered  2023-06-30  FOODBEV 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. InnerOut Training Solutions 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.