SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Mine ore/coal on a hand-got (manual) small scale mine 
SAQA US ID UNIT STANDARD TITLE
260979  Mine ore/coal on a hand-got (manual) small scale mine 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard reflects the skills, values and knowledge required by people in the field of Small Scale Mining who wish to mine ore/coal on a hand-got (manual) small-scale mine.

People credited with this unit standard are able to:
  • Demonstrate an understanding of mining ore/coal on a hand-got (manual) small-scale mine.
  • Obtain information necessary to mine ore/coal on a hand-got (manual) small-scale mine.
  • Obtain all the necessary equipment for mining ore/coal on a hand-got (manual) small-scale mine.
  • Mine ore/coal on a hand-got (manual) small-scale mine.

    The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and contribute to the upliftment and economic growth of the mining and minerals.

    This unit standard is intended to promote general skills, knowledge and understanding of mining ore/coal on a hand-got (manual) small-scale mine in the mining and minerals sector in order to ensure knowledgeable and informed workers. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed learners are already competent in:
  • Mathematical Literacy at NQF Level 2. 

  • UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate an understanding of mining ore/coal on a hand-got (manual) small-scale mine. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The information required to mine ore/coal on a hand-got (manual) small-scale mine is described in terms of organisational requirements. 

    ASSESSMENT CRITERION 2 
    The evaluation of information necessary to mine ore/coal on a hand-got (manual) small-scale mine is described in terms of required specifications. 

    ASSESSMENT CRITERION 3 
    Procedures to be followed during mining of ore/coal on a hand-got (manual) small-scale mine are described in terms of operational requirements. 

    SPECIFIC OUTCOME 2 
    Obtain information necessary to mine ore/coal on a hand-got (manual) small-scale mine. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The information necessary to mine ore/coal on a hand-got (manual) small-scale mine is obtained. 
    ASSESSMENT CRITERION RANGE 
    Information necessary must include the following:
  • Mine plans.
  • Equipment requirements.
  • Infrastructure requirements (road, water, electricity).
  • Risk assessment.
     

  • ASSESSMENT CRITERION 2 
    The information necessary to mine ore/coal on a hand-got (manual) in a small-scale mine is evaluated in accordance with specified requirements. 

    SPECIFIC OUTCOME 3 
    Source all the necessary equipment to mine ore/coal on a hand-got (manual) small-scale mine. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The equipment required to mine ore/coal on a hand-got (manual) small-scale mine is identified in accordance with specified requirements. 

    ASSESSMENT CRITERION 2 
    The equipment required to mine ore/coal on a hand-got (manual) small-scale mine is obtained in accordance with organizational procurement requirements. 

    SPECIFIC OUTCOME 4 
    Mine ore/coal on a hand-got (manual) small-scale mine. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The information required to mine ore/coal is applied in accordance with organisational procedures. 

    ASSESSMENT CRITERION 2 
    The equipment required to mine ore/coal is utilized in accordance with manufacturer's specifications. 

    ASSESSMENT CRITERION 3 
    The ore/coal is mined according to stipulated mine standards. 
    ASSESSMENT CRITERION RANGE 
    Mine standards must include the following:
  • Health and safety policy.
  • Grade control.
  • Environmental Management Programme.
  • Applicable legislation.
     


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against the qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the associated unit standards.
  • Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following items reflect the type of knowledge that the assessor will evaluate:

    Critical factors and functions relating to the operation:
  • Occupational safety, health and risk management requirements.
  • Emergency procedures.
  • Specified communication requirements.

    Processes and events:
  • Factors affecting the performance of operation.

    Causes and effects (Occupational safety and health):
  • Use of personal protective equipment.
  • Use of tools and equipment.
  • Workplace hazards and associated risks.
  • Effective communication.

    Procedures and techniques:
  • Methods of collecting and analysing, organising, summarising and presenting data.
  • Quality related procedures.

    Regulations, legislation, agreements, policies and standards:
  • Occupational safety, health and environmental legislation and regulations.
  • Quality policies, standards and agreements. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking.

    Note: The ability of the candidate to identify sub-standard and hazardous conditions, assess and take appropriate action. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community.

    Note: The ability and willingness of the candidate to accept and interpret work instructions correctly. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively.

    Note: The ability of the candidate to indicate what methods, tools and personal protective equipment is required and communicate to fellow workers his/her intentions and assistance required. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.

    Note: The ability of the candidate to reconcile the information from visual and physical examinations and constantly evaluate the changing situation. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.

    Note: The appropriate communication with the relevant personnel with regard to the reporting of hazards and sub-standard conditions will indicate his/her proficiency in effective communication. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.

    Note: The ability of the candidate to identify and refer anomalous behaviour to a specialist confirms understanding that a specific observation, inference, action or decision can have a devastating effect. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Terminology:

    Specified Requirements:

    Specified requirements include legal and site-specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health and Safety Act and Regulations, 1996 (Act 29/1996), and Minerals Act and Regulations, 1991 (Act 50/1991).
  • Mandatory Codes of Practice.
  • SANS and other relevant Standards.
  • Chief Inspector of Mines' Directives/Instructions.
  • Guidelines issued by the Chief Inspector of Mines.

    Site-Specific:
  • Managerial instructions.
  • Hazard Identification and Risk Assessments (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • List of Recorded OH&S Risks.
  • Equipment and Materials Specifications.
  • Working Guides.
  • Mine Standard Procedures. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  64909   National Certificate: Small Scale Mining  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.