SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Prepare for plastering 
SAQA US ID UNIT STANDARD TITLE
9969  Prepare for plastering 
ORIGINATOR
SGB Building Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Building Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  15 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The purpose of this Unit Standard is to enable construction plasterers to set out their work, prepare all types of surfaces for plastering, and to mix plaster, screed and grano. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
FETC NQF Level 2 literacy and numeracy competencies. 

UNIT STANDARD RANGE 
1. Materials include sand, cementitious materials, lime, bonding agents, additives, water, etc.

2. Surfaces form part of or constitute entire walls, ceilings, floors, beams, columns, door and window openings, etc.

3. Protruding objects or contaminating agents are removed, scraped, chipped, etc.

4. Tools include steel and wood floats, trowels, wheelbarrows, buckets, mortar boards, hammers, spirit levels, plumb bobs, squares, screeding bar, nylon line, dumpy level, etc. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Set out work for plastering. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. The correct work area is identified according to the drawings. 

ASSESSMENT CRITERION 2 
2. A work task is communicated and agreed. 

ASSESSMENT CRITERION 3 
3. The work area is measured and set out according to the drawings and specifications. 

ASSESSMENT CRITERION 4 
4. Levels are determined and transferred. 

ASSESSMENT CRITERION 5 
5. An appropriate area is identified for batching of plaster, with due regard to proximity and transport to work area. 

SPECIFIC OUTCOME 2 
Prepare work surfaces for plastering. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Protrusions are removed. 

ASSESSMENT CRITERION 2 
2. Correct materials, tools and equipment are used. 

ASSESSMENT CRITERION 3 
3. Surface defects and cracks are identified and corrected.. 

ASSESSMENT CRITERION 4 
4. Levels and lines are corrected to be true and plumb. 

ASSESSMENT CRITERION 5 
5. Existing surfaces and built-in items are identified and protected against damage. 

ASSESSMENT CRITERION 6 
6. Dust and dirt are removed and surfaces are dampened, where necessary. 

SPECIFIC OUTCOME 3 
Mix plaster, screed and grano. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Plaster, screed and grano mixes are identified and batched according to specifications and specific work requirements. 

ASSESSMENT CRITERION 2 
2. The implications of mixing incorrectly are understood. 

ASSESSMENT CRITERION 3 
3. Quantities of batched mixes are correctly estimated and applied, and the consequences of over-batching are understood. 

ASSESSMENT CRITERION 4 
4. Correct materials, tools and equipment are used. 


UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
Assessment of learner achievements takes place at providers accredited by CETA (RSA, 1998b) for the provision of programs that result in the outcomes specified. CETA is responsible for moderation of learner achievements of learners who meet the requirements of this unit standard. 

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
Qualifying learners understand and can explain:

1. The purpose of preparing surfaces correctly.
2. The definitions of level, square, and plumb.
3. Types of cements, bonding agents, (plaster key), sand, additives, etc. 


Critical Cross-field Outcomes (CCFO): 

UNIT STANDARD CCFO IDENTIFYING 
Identify and solve problems

1. Set out work for plastering.
2. Prepare work surfaces for plastering.
3. Mix plaster, screed and grano.
  • The correct work area is identified according to the drawings.
  • The work area is measured and set out according to the drawings and specifications.
  • Levels are determined and transferred.
  • An appropriate area is identified for batching of plaster, with due regard to proximity and transport to work area.
  • Correct materials, tools and equipment are used.
  • Surface defects and cracks are identified and corrected.
  • Existing surfaces and built-in items are identified and protected against damage.
  • The implications of mixing incorrectly are understood.
  • Quantities of batched mixes are correctly estimated and applied, and the consequences of over-batching are understood. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others

    1. Set out work for plastering.
    2. Mix plaster, screed and grano.
  • A work task is communicated and agreed.
  • Plaster, screed and grano mixes are identified and batched according to specifications and specific work requirements. 

  • UNIT STANDARD CCFO ORGANISING 
    Employ self management

    1. Set out work for plastering.
  • A work task is communicated and agreed. 

  • UNIT STANDARD CCFO COLLECTING 
    Manage information

    1. Set out work for plastering
    2. Prepare work surfaces for plastering
    3. Mix plaster, screed and grano.
  • The correct work area is identified according to the drawings.
  • A work task is communicated and agreed.
  • The work area is measured and set out according to the drawings and specifications.
  • Levels are determined and transferred.
  • An appropriate area is identified for batching of plaster, with due regard to proximity and transport to work area.
  • Levels and lines are corrected to be true and plumb.
  • Plaster, screed and grano mixes are identified and batched according to specifications and specific work requirements.
  • Quantities of batched mixes are correctly estimated and applied, and the consequences of over-batching are understood. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively

    1. Set out work for plastering.
  • A work task is communicated and agreed. 

  • UNIT STANDARD CCFO SCIENCE 
    Understand Contextual world-systems

    1. Set out work for plastering.
  • The work area is measured and set out according to the drawings and specifications.
  • Levels are determined and transferred. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate scientific and technological competence

    1. Set out work for plastering.
    2. Mix plaster, screed and grano.
  • The correct work area is identified according to the drawings.
  • The work area is measured and set out according to the drawings and specifications.
  • Levels are determined and transferred.
  • Plaster, screed and grano mixes are identified and batched according to specifications and specific work requirements.
  • The implications of mixing incorrectly are understood.
  • Quantities of batched mixes are correctly estimated and applied, and the consequences of over-batching are understood. 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  20814   National Certificate: Construction Plastering  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2009-03-12  Was CETA until Last Date for Achievement 
    Elective  65409   National Certificate: Building and Civil Construction  Level 3  NQF Level 03  Reregistered  2023-06-30  CETA 
    Elective  22671   National Certificate: Construction Masonry  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2009-03-12  Was CETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. 17 Shaft Training 
    2. Abakholwe Community Developers (Pty) Ltd 
    3. AFRICA SKILLS VILLAGE 
    4. Amagema Development and Social Consultants 
    5. Amber Tower Training 
    6. Arehone Consulting 
    7. Artisan Development Academy 
    8. Aveng Grinaker -LTA Civil Engineering 
    9. BELCOMEC TRAINING 
    10. Better Best Agri Development 
    11. BH Training and Consulting (Pty) Ltd 
    12. Bhekwell Group 
    13. Big Tree Group 
    14. Blacken Security Services 
    15. Bokgoni Training And Development 
    16. Border Kei Training Trust 
    17. Builders Training Centre 
    18. Capricorn FET College - Central Office 
    19. Centre For Economic Participation 
    20. Coastal Kzn F.E.T. College - Appelsbosch Campus 
    21. College of Cape Town (City Campus) 
    22. Construction Resource Development College 
    23. CSTA Training Academy 
    24. Eastcape Training Centre 
    25. EDUCATORY ELECTRO SERVICES 
    26. Edzani Community Development and Consultancy 
    27. Ekurhuleni Artisans and Skills Training Pty Ltd 
    28. Ekurhuleni East College For TVET 
    29. Ergo-Maphelong Institute 
    30. GADJENI TRADING ENTERPRISE 
    31. Gert Sibande TVET College 
    32. Godisang Development 
    33. Goitsebasadi Construction Project 
    34. Goldfields FET College 
    35. Ikemeleng Training and Development Services 
    36. IMBAWULA CIVIL ENGINEERING ACADEMY 
    37. In Touch Community Development & Project Managers 
    38. INDUSTRIES EDUCATION & TRAINING INSTITUTE 
    39. IQHAYIYA COMMUNITY COLLEGE (Legacy) 
    40. Isivuno HR and Solutions 
    41. Josmap Training Institute 
    42. Keewave Trading 403 
    43. KING HINTSA TVET College 
    44. L S Nkosi CC 
    45. LAILADOO TRADING CC 
    46. Leps Training Consultants 
    47. Luzana Training Academy 
    48. Macsen Construction & Projects 
    49. Maduna Development Agency cc 
    50. Maesela Phaladi Investment and Construction PTY LTD 
    51. Mahumani Empowerment Servives Centre 
    52. Majoncor Projects and Training Academy (Pty) Ltd 
    53. Majuba TVET College 
    54. Makhonya Training & Development Services 
    55. Mangaung Artisan Developers and Projects 
    56. Masana Social Consultants cc 
    57. Microzone Training CC 
    58. Mnambithi TVET College 
    59. Mohlaje Solutions (Pty) Ltd 
    60. Motheo TVET College 
    61. Mothusi Management Consultants 
    62. Mpilende Training and Technology Solutions 
    63. MPUMALANGA REGIONAL TRAINING TRUST 
    64. Mthoms Trading 
    65. MTL Training and Projects 
    66. Namuntlha Training and Development (Pty)Ltd 
    67. Ngakatse Trading 
    68. Nkomaba Trading and Projects 
    69. Nnite Trading Enterprise 
    70. No Limits Trading Enterprise 
    71. Nokuthula Dube & Associates 
    72. NOLOSHA 
    73. NOMASOJABULA TRAINING CENTRE 
    74. Northern Cape Rural TVET College 
    75. Northern Cape Urban TVET College 
    76. Northlink TVET College 
    77. Novi General Services 
    78. NSINGWENI CONSULTING (PTY) LTD 
    79. Orbit FET College - Central Office 
    80. Othandweni Training Centre 
    81. PMA Holdings (PTY ) LTD. 
    82. Primeserv Corporate Solutions 
    83. PROMINENT EMZANSI PROJECTS 
    84. Protech Training (Pty) Ltd 
    85. Qualfurn Training & Projects (Pty) Ltd 
    86. Reflections Development Institute 
    87. RESISA LOGISTICS (Ltd) Pty 
    88. Sakhisizwe Development Training 
    89. Setlhabi Development 
    90. Silver Stars Trading 37 CC 
    91. SISHEN IRON ORE COMPANY (PTY) LTD 
    92. Sivile Housing Association RSA 
    93. SJM Squared Construction CC 
    94. Sonani Training and Communications 
    95. Sphola Consulting CC 
    96. STEVENEL TRAINING CONSTRUCTION AND CIVIL 
    97. Thekweni TVET College 
    98. Tius Consultants 
    99. Tjeka Training Matters Pty Ltd 
    100. Tlhogi''s Consulting and Projects 
    101. Tovani Traiding 299 
    102. Tshwane North College for FET - Central Office 
    103. TSK Projects 
    104. Ubucubu Home Industries 
    105. UKHONKOLO CONCRETE PRODUCTS 
    106. Umfolozi FET College 
    107. Umgungundlovu FET College 
    108. WAL TRAINING 
    109. West Coast TVET College 
    110. Zama Training & Developments 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.