SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Receive, store and test bulk chemicals in the fibreboard and chipboard manufacturing process 
SAQA US ID UNIT STANDARD TITLE
117211  Receive, store and test bulk chemicals in the fibreboard and chipboard manufacturing process 
ORIGINATOR
SGB Wood Products 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for people who can receive, store and test bulk chemicals in the fibreboard and chipboard manufacturing process, whilst adhering to other agreed standards pertaining to performance, safety, quality, and the environment. People credited with this unit standard are able to:
  • Receive and offload chemicals.
  • Perform routine laboratory tests on representative samples.
  • Perform stock control procedures. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:
  • Competency in mathematical and communication skills equivalent to that of a person who has qualified in these subjects at ABET 3.
  • An understanding of the basic activities of the fibreboard and chipboard industry process and procedures of the relevant workplace.
  • Knowledge and skills in the relevant workplace procedures, health and safety measures equivalent to ABET level 3 requirements. 

  • UNIT STANDARD RANGE 
    The scope of this Unit Standard covers:
  • The environment which can be described as a fibreboard and chipboard manufacturing plant with all its equipment and the correct sequence of the production phases.
  • The spread of raw material processed and products produced by the operation.
  • The people involved in the various workplaces.

    The context of this Unit Standard relates to the training of a Learner at NQF Level 2 in the fibreboard and chipboard manufacturing activity.

    The Level assigned to this Unit Standard, i.e. Level 2, is appropriate because it entails the training of a novice in a fibreboard and chipboard manufacturing environment and is a progression of the skills acquired from Levels 2 to 4. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Receive and offload chemicals. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The supplier's delivery documents are checked against the order. 

    ASSESSMENT CRITERION 2 
    The offloading equipment is operated as per work instructions. 

    ASSESSMENT CRITERION 3 
    The content of the transporter is off-loaded as per work instructions. 

    ASSESSMENT CRITERION 4 
    The relevant documentation is completed as per work instructions. 

    ASSESSMENT CRITERION 5 
    Documents are forwarded for data capturing. 

    SPECIFIC OUTCOME 2 
    Perform routine laboratory tests on representative samples. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    A representative sample is taken as per procedure. 

    ASSESSMENT CRITERION 2 
    Routine laboratory tests are performed on representative samples as per production requirements and procedures. 

    ASSESSMENT CRITERION 3 
    Test procedures are adhered to as per work instructions. 

    ASSESSMENT CRITERION 4 
    Results are recorded accurately as per work instructions. 

    ASSESSMENT CRITERION 5 
    Non-conforming results are reported immediately for corrective action to be taken. 

    SPECIFIC OUTCOME 3 
    Perform stock control procedures. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Stock levels are measured accurately and monitored on an ongoing basis. 

    ASSESSMENT CRITERION 2 
    Results are recorded as per work instructions. 

    ASSESSMENT CRITERION 3 
    Information is passed onto the relevant person as per work instructions. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual who wishes to be assessed against this Unit Standard may apply to, or inform, his immediate superior in the relevant workplace, to request management to arrange for his / her assessment by the relevant assessor accredited for this purpose by the ETQA of the FIETA. Accreditation for this Unit Standard shall be from the relevant Education and Training Quality Assurer (FIETA ETQA) through formative and summative assessment by a registered Assessor. Assessment should be contextual and be conducted in the workplace as far as possible.

    The relevant NSB and SGB should be notified of any feedback related to this qualification.
  • Assessors must be registered as an Assessor with the relevant ETQA.
  • Moderators must be registered as assessors with the relevant ETQA.
  • Training providers must be accredited by the relevant ETQA.
  • Moderation should include both internal and external moderation where applicable.
  • The FIETA ETQA will co-ordinate all moderation activities in accordance with their policies and procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    A demonstrated understanding of:
  • Communication and mathematical skills equivalent to NQF Level 1 requirements.
  • The fibreboard and chipboard operation.
  • Basic stock control principles. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and verbally report problems detected in the production process to the relevant person/s. 

    UNIT STANDARD CCFO WORKING 
    Work effectively and efficiently as a team member. 

    UNIT STANDARD CCFO COLLECTING 
  • Collect and record data on the activities performed, for the relevant person/s as and when requested.
  • Deliver, collect, clean and store tools and instruments. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Listen and understand instructions and verbally report in an effective manner to the relevant person/s. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Values:
  • The use of tasks and materials in the learning event plan should not discriminate against learners on any grounds prescribed in the Bill of Rights and Employment Equity Act and should promote the orientations outlined in the critical cross-field outcomes. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49082   GETC: Wood Products Processing  Level 1  NQF Level 01  Reregistered  2023-06-30  FPMSETA 
    Elective  49083   National Certificate: Wood Products Processing  Level 3  NQF Level 03  Reregistered  2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Amagema Development Consultants cc 
    2. CRK Designs (Pty) Ltd 
    3. ENB Training Service(PTY)Ltd 
    4. Future Discovery Training Academy CC 
    5. Imara Umbono Incorporated (Pty) Ltd 
    6. Imbewu Development Institute (Pty) Ltd 
    7. Lembede Investment Holdings (Pty) Ltd 
    8. Longata Consultant 
    9. Mavco Engineering (Pty) Ltd 
    10. Media Works 
    11. MGS Gcaba Contracting & Trading cc 
    12. Mwanga Training & Consulting (Pty) Ltd 
    13. New Business Initiative Management Consultancy 
    14. Nikwe Trading (Pty) Ltd 
    15. Nteko Investments 
    16. Phetho Concepts (Pty) Ltd 
    17. Prispiri (Pty) Ltd 
    18. Silungokuhle (Pty) Ltd 
    19. Valotech 274 (Pty) Ltd 
    20. VEB CELE & Associates (Pty) Ltd 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.