SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Break rocks by means of blasting 
SAQA US ID UNIT STANDARD TITLE
119099  Break rocks by means of blasting 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Registered" 
2005-11-30  2007-08-16  SAQA 0763/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2008-08-16   2011-08-16  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
244487  Break big rocks by means of blasting  Level 2  NQF Level 02   

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who are required to break big rocks by means of blasting.

People credited with this unit standard are able to:
  • Explain specified requirements regarding the breaking of big rocks by means of blasting;
  • Prepare to blast big rocks; and
  • Blast big rocks. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The credit calculation is based on the assumption that learners are already competent in terms of the following outcomes or areas of learning when starting to learn towards this unit standard:

    Persons attempting this unit should have knowledge of:
  • Basic health and safety practices pertaining to mining operations
  • Test for flammable gas by means of a hand held electronic instrument and take appropriate action.
  • Remove loose rocks by means of barring in an underground workplace
  • Support an underground workplace by means of stick support.
  • Install and remove mechanical props.
  • Charge shot holes with explosives and accessories 

  • UNIT STANDARD RANGE 
    Specific range statements are provided in the body of the unit standard where they apply to particular specific outcomes or assessment criteria. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain specified requirements regarding the breaking of big rocks by means of blasting. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The significant risks and consequences associated with the workplace hazards pertaining to the blasting of big rocks are explained. 
    ASSESSMENT CRITERION RANGE 
    Range of workplace hazards must include:
  • Unsafe ground conditions
  • Unsafe support conditions
  • Harmful gases
  • Rocks that could possibly roll down inclined areas
     

  • ASSESSMENT CRITERION 2 
    The significant risks and consequences associated with the work related hazards pertaining to the blasting of big rocks are explained. 
    ASSESSMENT CRITERION RANGE 
    Range of work related hazards must include:
  • Working with explosives
  • Working in proximity of moving machinery and equipment
  • Handling/re-positioning of rocks
     

  • ASSESSMENT CRITERION 3 
    The specified requirements pertaining to the product specifications in terms of usage of the explosives and accessories are explained. 
    ASSESSMENT CRITERION RANGE 
    Range of product specifications must include:
  • Types of explosives and accessories
  • Burning speeds of fuses and igniter cord
  • Delay times of detonators (where used)
  • Sequence of timing
     

  • SPECIFIC OUTCOME 2 
    Prepare to blast big rocks. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The required personal protective equipment is selected, available on person, operational and used in accordance with specified requirements. 

    ASSESSMENT CRITERION 2 
    The required tools, material and equipment are selected, available in the workplace, examined and transported according to specified requirements. 

    ASSESSMENT CRITERION 3 
    Permission to blast is obtained from the designated person in the required format according to specified requirements. 

    ASSESSMENT CRITERION 4 
    Precautions to prevent injuries, gassing, gas explosions, property damage and fires are taken according to specified requirements. 
    ASSESSMENT CRITERION RANGE 
    Range of precautions taken must include:
  • Placement of:
    - Guards
    - Barricades
    - Warning signs
  • Warning of persons
  • Prevention of persons inadvertently entering the affected area
  • Testing for harmful gases
  • Watering down
  • Removal of combustible and flammable substances.
     

  • ASSESSMENT CRITERION 5 
    The required type and quantity of explosives and accessories are transported and prepared according to specified requirements. 

    ASSESSMENT CRITERION 6 
    The area affected by the blasting is examined for workplace hazards associated with blasting big rocks. Workplace hazards are dealt with according to specified requirements. 
    ASSESSMENT CRITERION RANGE 
    Range of workplace hazards must include:
  • Unsafe ground conditions
  • Unsafe support conditions
  • Harmful gases
  • Rocks that could possibly roll down inclined areas
     

  • ASSESSMENT CRITERION 7 
    The consequences to health, safety and production of not adhering to specified requirements while preparing to blast big rocks are explained. 
    ASSESSMENT CRITERION RANGE 
    Range of non-adherence to specified requirements must include:
  • Personal protective equipment.
  • Selection, examination and use of tools, equipment, explosives and accessories.
  • Blasting without permission
  • Precautions to prevent injuries, gassing, gas explosions, property damage and fires
  • Transportation and preparation of explosives and accessories
  • Area examination.
     

  • SPECIFIC OUTCOME 3 
    Blast big rocks. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Charges are inserted, placed, secured, timed and connected to the ignition system according to specified requirements. 

    ASSESSMENT CRITERION 2 
    Tools and equipment are used according to specified requirements and in line with ergonomic principles. 

    ASSESSMENT CRITERION 3 
    Work related hazards pertaining to the blasting of big rocks are dealt with according to specified requirements. 
    ASSESSMENT CRITERION RANGE 
    Range of work related hazards must include:
  • Handling of explosives
  • Working in proximity of moving machinery and equipment
  • Handling/re-positioning of rocks
     

  • ASSESSMENT CRITERION 4 
    The charge is ignited, persons are positioned in a safe place and the prescribed re-entry period is adhered to according to specified requirements. 

    ASSESSMENT CRITERION 5 
    The blasted area is re-examined for workplace hazards associated with blasting big rocks. Workplace hazards are dealt with according to specified requirements. 
    ASSESSMENT CRITERION RANGE 
    Range of workplace hazards must include:
  • Unsafe support conditions
  • Unsafe ground conditions
  • Harmful gases
     

  • ASSESSMENT CRITERION 6 
    Interpersonal interaction is positive, consistent with specified requirements, promotes effective teamwork and avoids dysfunctional conflict. 

    ASSESSMENT CRITERION 7 
    Reports are completed and submitted according to specified requirements. 

    ASSESSMENT CRITERION 8 
    The consequences to health, safety and production of not adhering to specified requirements while blasting big rocks are explained. 
    ASSESSMENT CRITERION RANGE 
    Range of non-adherence to specified requirements must include:
  • Placement, securing, timing and connecting of charges
  • Use of tools and equipment
  • Ignition of charges, placement of persons and adherence to re-entry period
  • Re-examination of blasted area
  • Interpersonal interaction
  • Reports
     


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines and the agreed ETQA procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Essential embedded knowledge will be assessed through assessment of the specific outcomes in terms of the stipulated assessment criteria. Candidates are unlikely to achieve all the specific outcomes, to the standards described in the assessment criteria, without knowledge of the listed embedded knowledge. This means that for the most part, the possession or lack of the knowledge can be directly inferred from the quality of the candidate's performance. Where direct assessment of knowledge is required, assessment criteria have been included in the body of the unit standard.

    The following embedded knowledge is addressed in an integrated way in the unit standard:
  • Health and safety knowledge
  • Report writing
  • Legal and site-specific requirements 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking.
  • Note: The ability of the candidate to identify sub-standard and hazardous conditions, assess and take appropriate action. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community.
  • Note: The ability and willingness of the candidate to accept and interpret work instructions correctly. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively.
  • Note: The ability of the candidate to indicate what methods, tools and personal protective equipment is required and communicate to fellow workers his/her intentions and assistance required. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.
  • Note: The ability of the candidate to reconcile the information from visual and physical examinations and constantly evaluate the changing situation. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.
  • Note: The appropriate communication with the relevant personnel with regard to the reporting of hazards and sub-standard conditions will indicate his/her proficiency in effective communication. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others.
  • Note: The ability of the candidate to adhere to safety, health and environmental requirements illustrates his/her capability to use science and technology effectively. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.
  • Note: The ability of the candidate to identify and refer anomalous behaviour to a specialist confirms understanding that a specific observation, inference, action or decision can have a devastating effect. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 244487, which is "Break big rocks by means of blasting", Level 2, 3 credits.

    Terminology

    Specified Requirements

    Specified requirements include legal and site-specific requirements and are contained in one or more of the following documents:

    Legal
  • Relevant Acts: e.g. Mine Health & Safety Act, 1996 (Act no 29/1996), and Minerals Act and Regulations, 1991 (Act no 50/1991)
  • Mandatory Codes of Practice
  • SABS and other relevant Standards
  • Chief Inspector of Mines' Directives

    Site Specific
  • Hazard Identification and Risk Assessments (HIRA)
  • Occupational Health and Safety Risk Management Programme
  • Voluntary Codes of Practice
  • Managerial Instructions
  • Mine Standard Procedures
  • List of Recorded OH&S Risks
  • Working Guides
  • Equipment and Materials Specifications


    Notes to Assessors

    Assessors should keep the following principles in mind when designing and conducting assessments against this unit standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the person competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
  • Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.
  • Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
  • The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
  • All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, direct, authentic, sufficient, systematic, open and consistent.


    Unit Standard Justification

    Level
  • Skills: Level 2: The skills required have some variety but are still fairly simple
  • Procedures: Level 2: Procedure is known and familiar
  • Context: Level 2: Although the process could occur in different contexts, the contexts are repeatedly applicable and known to the candidate
  • Knowledge: Level 3: Relevant theoretical knowledge is required
  • Information processing: Level 2: Information is readily available but some processing is required
  • Problem Solving: Level 2: The candidate will only have to apply given solution to known/familiar problems.
  • Orientation of activities: Level 3: Follows instructions but has some autonomy to make own decisions and give instructions down ward.
  • Application of responsibility: Level 3: Candidate's output is quality checked, i.e. on random based
  • Orientation of scope of responsibility: Level 2: Some responsibility towards quantity and quality

    Average Level: 21 / 9 = 2.3
    Actual Level Assigned: 2


    Credits

    Total hours required by the learner to achieve the required outcome:
  • Classroom Teaching: 10 hours
  • On-The-Job Training: 18 hours
  • Total: 28 hours

    Credits Achieved: 28 / 10 = 2.8
    Credits Assigned: = 3 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  49014   National Certificate: Rockbreaking: Underground Hard Rock  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2007-08-16  Was MQA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ASSMANG BEESHOEK MINE 
    2. CONCOR PROJECTS PTY LTD 
    3. FOSKOR (PTY) LTD 
    4. IMPALA PLATINUM SERVICES LTD 
    5. MANCAS CONSULTINGS CC 
    6. MATHOME TRAINING AND DEVELOPMENT (PTY) LTD 
    7. MODIKWA MINING PERSONNEL SERVICES PTY L TD 
    8. PALABORA COPPER (PTY) LTD 
    9. SAFETY TRAINING PRACTITIONERS PTY LTD 
    10. SENZEKO EXECUTIVE RISK CC 
    11. SIBANYE GOLD ACADEMY PROPRIETARY LIMITED 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.