SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Apply industrial protective coatings 
SAQA US ID UNIT STANDARD TITLE
14491  Apply industrial protective coatings 
ORIGINATOR
SGB Building Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Building Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The purpose of this unit standard is to enable construction painters to apply industrial protective coatings. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
FETC NQF Level 2 literacy and numeracy competencies; Unit Standards 9. 

UNIT STANDARD RANGE 
  • Industrial surface coating system components include pigments, extenders, fillers, binders, thinners, additives and catalysts.
  • Industrial surface coatings include new and previously coated metal surfaces, coatings for pipelines and underground structures, fireproofing for structural steel and equipment supports, and metal spray coating of steel surfaces, and convertible and non-convertible surface coatings.
  • Industrial surface coating properties include opacity, consistency, flow, adhesion, elasticity, drying time, gloss, spreading rate, durability and can stability.
  • Performance characteristics are influenced by atmospheric influences, including temperature, humidity and pollutants, and substrate influences including temperature, composition and reactivity.
  • Industrial surface coating system component performance characteristics include durability, application, and film attribute.
  • Metals include ferrous and non-ferrous metals (iron, steel, aluminium, zinc, copper, lead).
  • Pre-treatments include degreasing agents, etch-primers, and chemical treatments.
  • Preparation includes hand abrasion, electric and pneumatic tool application, and waterblasting.
  • Fireproofing includes liquid coatings and mesh application, including wet film thickness; mesh fibre orientation and overlap, and uniformity of application.
  • Pipeline and underground coatings include petrolatum-impregnated tapes, plastic tapes and epoxy finishes.
  • Metal spray coatings include zinc, aluminium, and zinc/aluminium alloys.
  • Methods of drying include oxidation, evaporation, and polymerisation.
  • Application faults include preparation and dry film thickness.
  • Equipment faults include nozzles, pressure, and turbine speed faults.
  • Can stability defects include skinning, fattening, livering, settling, flocculation, separation and gelling.
  • Component failure effects in industrial surface coatings include bleeding, cracking, crazing, chalking, discoloration, loss of gloss, retarded drying, floating, yellowing, mould, mildew, and blistering.
  • Substrate failure effects include bleeding, saponification, efflorescence, cissing, sinkage, flashing, flaking, rusting, bleaching, adhesion, and blistering. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare industrial surface coating 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Components, properties, performance characteristics and possible defects of industrial surface coating systems are described. 

    ASSESSMENT CRITERION 2 
    2. Types of industrial surface coatings are identified. 

    ASSESSMENT CRITERION 3 
    3. Potential coating problems are identified. 

    ASSESSMENT CRITERION 4 
    4. Surfaces are cleaned and pre-treated. 

    ASSESSMENT CRITERION 5 
    5. Appropriate surface coating systems are selected. 

    SPECIFIC OUTCOME 2 
    Apply industrial surface coatings 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. All coatings are thoroughly mixed before application. 

    ASSESSMENT CRITERION 2 
    2. All coatings are dried. 

    ASSESSMENT CRITERION 3 
    3. All coatings are applied in accordance with manufacturer specifications and requirements. 

    ASSESSMENT CRITERION 4 
    4. All coatings are dried. 

    ASSESSMENT CRITERION 5 
    5. Correct materials, tools and equipment are used. 

    ASSESSMENT CRITERION 6 
    6. Tools, equipment and work area are clean after completion. 

    SPECIFIC OUTCOME 3 
    Remedy failure effects in industrial surface coatings 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Remedies for faults in industrial surface coatings are identified. 

    ASSESSMENT CRITERION 2 
    2. Application faults are remedied. 

    ASSESSMENT CRITERION 3 
    3. Equipment faults are remedied. 

    ASSESSMENT CRITERION 4 
    4. Component failure effects are remedied. 

    ASSESSMENT CRITERION 5 
    5. Substrate failure effects are remedied. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    Accreditation Process and Moderation:

    Assessment of learner achievements takes place at providers accredited by CETA (RSA, 1998 b) for the provision of programs that result in the outcomes specified for the Certificate for Construction painters. CETA is responsible for moderation of learner achievements of learners who meet the requirements of this unit standard. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Qualifying learners understand and can explain:
  • Industrial surface coating system types and component functions.
  • Industrial surface coating system component performance characteristics, including durability, application, and film attribute.
  • Metal spray coating.
  • Metal spray unit parts and maintenance.
  • Components, properties, performance characteristics and possible defects of industrial surface coating systems.
  • Types of industrial surface coatings.
  • Manufacturer specifications and requirements.
  • Remedies for faults in industrial surface coatings.
  • Application faults.
  • Equipment faults.
  • Component failure effects.
  • Substrate failure effects. 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems - refer to the following:

    Specific Outcomes:
  • Specific Outcome 1 = Prepare industrial surface coatings
  • Specific Outcome 3 = Remedy failure effects in industrial surface coatings

    Assessment Criteria:
  • Components, properties, performance characteristics and possible defects of industrial surface coating systems are described.
  • Potential coating problems are identified.
  • Appropriate surface coating systems are selected.
  • Remedies for faults in industrial surface coatings are identified.
  • Application faults are remedied.
  • Equipment faults are remedied.
  • Component failure effects are remedied.
  • Substrate failure effects are remedied. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate scientific and technological competence - refer to the following:

    Specific Outcomes:
  • Specific Outcome 1 = Prepare industrial surface coatings
  • Specific Outcome 2 = Apply industrial surface coatings
  • Specific Outcome 3 = Remedy failure effects in industrial surface coatings

    Assessment Criteria:
  • Components, properties, performance characteristics and possible defects of industrial surface coating systems are described.
  • Types of industrial surface coatings are identified.
  • Potential coating problems are identified.
  • Appropriate surface coating systems are selected.
  • All coatings are applied in accordance with manufacturer specifications and requirements.
  • Correct materials, tools and equipment are used.
  • Remedies for failures in industrial surface coatings are identified. 

  • UNIT STANDARD CCFO CONTRIBUTING 
    Understand contextual world systems - refer to the following:

    Specific Outcomes:
  • Specific Outcome 1 = Prepare industrial surface coatings
  • Specific Outcome 2 = Apply industrial surface coatings

    Assessment Criteria:
  • Components, properties and possible defects of industrial surface coating systems are described.
  • Potential coating problems are identified.
  • All coatings are applied in accordance with manufacturer specifications and requirements.
  • Correct materials, tools and equipment are used.
  • Tools, equipment and work area are clean after completion. 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  65409   National Certificate: Building and Civil Construction  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Elective  20919   National Certificate: Construction Painting  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2009-03-12  Was CETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Akaf Bodyguards 
    2. BELCOMEC TRAINING 
    3. BH Training and Consulting (Pty) Ltd 
    4. BOLAND COLLEGE (Paarl) 
    5. Certified Training Solutions (Pty) Ltd 
    6. Eastcape Training Centre 
    7. Edu House South Africa 
    8. Edzani Community Development and Consultancy 
    9. Ekurhuleni Artisans and Skills Training Pty Ltd 
    10. Elangeni College for FET - Central Office 
    11. Gert Sibande TVET College 
    12. Goitsebasadi Construction Project 
    13. INDUSTRIES EDUCATION & TRAINING INSTITUTE 
    14. Leps Training Consultants 
    15. Mahumani Empowerment Servives Centre 
    16. Majoncor Projects and Training Academy (Pty) Ltd 
    17. Majuba TVET College 
    18. Mavco Engineering 
    19. Mnambithi TVET College 
    20. Mopani South East FET College - Central Office 
    21. Motheo TVET College 
    22. MPUMALANGA REGIONAL TRAINING TRUST 
    23. MTL Training and Projects 
    24. Northern Cape Rural TVET College 
    25. Northlink TVET College 
    26. Primeserv Corporate Solutions 
    27. Qualfurn Training & Projects (Pty) Ltd 
    28. Ratidzo Trading PTY Ltd 
    29. Raubex Construction Pty (Ltd) 
    30. Sakhisizwe Development Training 
    31. Sekhukhune District Municipality EMS Training Academy 
    32. Sheq and Environmental Projects 
    33. Sonani Training and Communications 
    34. Tjeka Training Matters Pty Ltd 
    35. Tovani Traiding 299 
    36. Tshwane North College for FET - Central Office 
    37. Ubucubu Home Industries 
    38. Zama Training & Developments 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.