SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED QUALIFICATION THAT HAS PASSED THE END DATE: 

National Certificate: Construction Painting 
SAQA QUAL ID QUALIFICATION TITLE
20919  National Certificate: Construction Painting 
ORIGINATOR
SGB Building Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY NQF SUB-FRAMEWORK
Was CETA until Last Date for Achievement  OQSF - Occupational Qualifications Sub-framework 
QUALIFICATION TYPE FIELD SUBFIELD
National Certificate  Field 12 - Physical Planning and Construction  Building Construction 
ABET BAND MINIMUM CREDITS PRE-2009 NQF LEVEL NQF LEVEL QUAL CLASS
Undefined  120  Level 3  NQF Level 03  Regular-Unit Stds Based 
REGISTRATION STATUS SAQA DECISION NUMBER REGISTRATION START DATE REGISTRATION END DATE
Passed the End Date -
Status was "Reregistered" 
SAQA 0160/05  2006-08-01  2009-03-12 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2010-03-12   2013-03-12  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This qualification is replaced by: 
Qual ID Qualification Title Pre-2009 NQF Level NQF Level Min Credits Replacement Status
65409  National Certificate: Building and Civil Construction  Level 3  NQF Level 03  140  Complete 

PURPOSE AND RATIONALE OF THE QUALIFICATION 
The greatest technical skills need exists regarding:
  • Surface preparation before painting
  • Area preparation
  • Selecting and applying different paints to different surfaces according to specification, using paint techniques to apply undercoats and final coats, and to varnish surfaces
  • Paint preparation
  • Handling the required equipment
  • Knowledge of different paints
  • Knowledge of materials used
  • Knowledge of different surfaces
  • Planning the paint job, by obtaining information about painting requirements

    The purpose of the qualification is that qualifying learners are able to prepare, prime and coat absorbent and non-absorbent surfaces using conventional construction painting skills, without supervision. A construction painter who works without supervision should be able to establish a site, install and use access equipment, select the correct materials, tools and equipment, prepare and prime surfaces, and paint surfaces, employing safe and healthy work practices. In addition, the qualifying learner will demonstrate competence in two areas of specialisation, elected from applying wallpaper, special surfaces, basic business practices, and industrial protective painting. The qualified learner is able to competently fulfil painting contracts safely and in a professional manner, to ensure that industry standards are maintained. 

  • RECOGNISE PREVIOUS LEARNING? 

    EXIT LEVEL OUTCOMES 
    On achieving this qualification, learners will be able to:
  • calculate quantities for construction painting materials
  • apply basic business concepts to manage a small enterprise
  • communicate verbally and non-verbally with customers
  • establish the health and safety of a work area
  • render basic first aid
  • establish the structure of a work area
  • erect, use and dismantle access equipment
  • select materials, tools and equipment
  • prepare and prime surfaces
  • paint surfaces
  • apply special surface coatings
  • apply wallpaper
  • apply industrial protective coatings 

  • ASSOCIATED ASSESSMENT CRITERIA 
    In particular, assessors should assess that the learner demonstrates an ability to consider a range of options by:
  • Measuring the quality of the observed practical performance as well as the theory and underpinning knowledge.
  • Using methods that are varied to allow the learner to display thinking and decision making in the demonstration of practical performance.
  • Maintaining a balance between practical performance and theoretical assessment methods to ensure each is measured in accordance with the level of the qualification.
  • Taking into account that the relationship between practical and theoretical is not fixed but varies according to the type and level of qualification. 

  • INTERNATIONAL COMPARABILITY 
    These standards have been developed in line with international standards for the same level of learning and application. Specific comparisons have been made with the standards employed in Australia, New Zealand and the United Kingdom, and some standards are based on those used in New Zealand. Included are the New Zealand National Certificates in Painting and Decorating (with strands in Specialised Coatings, Industrial Coatings, and Decorating) - Levels 3 to 5, the Australian National Certificates in Painting and Decorating - Levels 1 to 4, and the British National Vocational Qualification for Painting and Decorating (Construction), Level 3. The credits and outcomes are comparable to the qualification developed here, at NQF level 3. 

    ARTICULATION OPTIONS 
    This qualification has been developed for mobility across similar trades within the industry and is intended to allow for further learning towards supervisory and management qualifications within this and other sectors. This qualification builds on other certificates from a range of sub-sectors and will provide articulation with a range of qualifications in both technical and management areas. Articulation on the Framework is possible with qualifications such as Construction Plastering, and Construction Tiling, as well as fundamental Unit Standards in this qualification with those in others, such as Unit Standards 8558, 7784, 7788, 7885, and 8556. Also, articulation with ABET Level 4, and with FET Levels 2 and 4 qualifications is possible. The competencies attained during this qualification provides a basis for further learning towards SMME management, entrepreneurship, construction site supervision, scaffolding erection, spray painting, sandblasting, decorating, glazing, etc. 

    MODERATION OPTIONS 
    Assessment of learner achievements takes place at providers accredited by CETA (RSA, 1998b) for the provision of programs that result in the outcomes specified for the Certificate for Construction painters by. CETA is responsible for moderation of learner achievements of learners who meet the requirements of this qualification.

    Anyone assessing a learner or moderating the assessment of a learner against this Qualification must be registered as an assessor with the relevant ETQA. Any institution offering learning that will enable the achievement of this Qualification must be accredited as a provider with the relevant ETQA. Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQAs policies and guidelines for assessment and moderation; in terms of agreements reached around assessment and moderation between ETQAs and in terms of the moderation guideline detailed immediately below.

    Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless the ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual unit standards as well as the integrated competence described in the qualification.

    Anyone wishing to be assessed against this Qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

    CRITERIA FOR THE REGISTRATION OF ASSESSORS 
    For an applicant to register as an assessor, the applicant needs:
  • A minimum of 2 (two) years' practical, relevant occupational experience.
  • Detailed documentary proof of educational qualification, practical training undergone, and experience gained by the applicant (Portfolio of Evidence).
  • A recognised assessor qualification. 

  • NOTES 
    This qualification has been replaced by qualification 65409, which is "National Certificate in Building and Civil Construction", Level 3, 140 credits.

    Only 16 Elective credits are needed 

    UNIT STANDARDS: 
      ID UNIT STANDARD TITLE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
    Core  9966  Establish and prepare a work area  Level 2  NQF Level 02 
    Core  9962  Calculate construction quantities to develop a work plan  Level 3  NQF Level 03 
    Core  9967  Erect, use and dismantle access equipment  Level 3  NQF Level 03 
    Core  14496  Paint surfaces  Level 3  NQF Level 03  15 
    Core  14499  Prepare and prime new surfaces  Level 3  NQF Level 03  15 
    Core  14500  Prepare and prime previously coated surfaces  Level 3  NQF Level 03  15 
    Core  9968  Procure materials, tools and equipment  Level 3  NQF Level 03 
    Fundamental  8968  Accommodate audience and context needs in oral communication  Level 3  NQF Level 03 
    Fundamental  9010  Demonstrate an understanding of the use of different number bases and measurement units and an awareness of error in the context of relevant calculations  Level 3  NQF Level 03 
    Fundamental  9013  Describe, apply, analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts  Level 3  NQF Level 03 
    Fundamental  8969  Interpret and use information from texts  Level 3  NQF Level 03 
    Fundamental  9012  Investigate life and work related problems using data and probabilities  Level 3  NQF Level 03 
    Fundamental  8973  Use language and communication in occupational learning programmes  Level 3  NQF Level 03 
    Fundamental  7456  Use mathematics to investigate and monitor the financial aspects of personal, business and national issues  Level 3  NQF Level 03 
    Fundamental  8970  Write texts for a range of communicative contexts  Level 3  NQF Level 03 
    Elective  9964  Apply health and safety to a work area  Level 2  NQF Level 02 
    Elective  9965  Render basic first aid  Level 2  NQF Level 02 
    Elective  9973  Apply basic business concepts  Level 3  NQF Level 03 
    Elective  14494  Apply wallpaper  Level 3  NQF Level 03 
    Elective  9960  Communicate verbally and non-verbally in the workplace  Level 3  NQF Level 03 
    Elective  14491  Apply industrial protective coatings  Level 4  NQF Level 04 
    Elective  14493  Apply special surface coatings  Level 4  NQF Level 04 
    Elective  14492  Identify, interpret and produce working piping drawings  Level 4  NQF Level 04 


    LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION: 
    When qualifications are replaced, some of their learning programmes are moved to being recorded against the replacement qualifications. If a learning programme appears to be missing from here, please check the replacement.
     
    NONE 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Academy for Construction Skills (Pty) Ltd (ACS) 
    2. Construction Resource Development College 
    3. Ekurhuleni East College For TVET 
    4. Ikemeleng Training and Development Services 
    5. Leps Training Consultants 
    6. Mahumani Empowerment Servives Centre 
    7. Microzone Training CC 
    8. MPUMALANGA REGIONAL TRAINING TRUST 
    9. Northlink TVET College 
    10. Sakhisizwe Development Training 
    11. Tjeka Training Matters Pty Ltd 
    12. Tshwane North College for FET - Central Office 
    13. Zama Training & Development cc 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.