SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Calculate construction quantities to develop a work plan 
SAQA US ID UNIT STANDARD TITLE
9962  Calculate construction quantities to develop a work plan 
ORIGINATOR
SGB Building Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Building Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2008-05-13  2009-03-12  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2010-03-12   2013-03-12  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
261661  Develop construction work plans  Level 3  NQF Level 03   

PURPOSE OF THE UNIT STANDARD 
The purpose of this Unit Standard is to enable learners to calculate quantities for the purpose of computing quantities of materials required to complete a job cost-effectively, and at the desired standard, and to use these calculations to develop a work plan. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
FETC NQF Level 2 literacy and numeracy competencies. 

UNIT STANDARD RANGE 
Work plan components include scope of work, resources, start date to earliest finish date, responsibilities, costs and quotes. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Calculate material quantities required. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Accurate calculations are made, for both multiplication and division, with numbers of up to three digits. 

ASSESSMENT CRITERION 2 
2. Percentages are accurately computed. 

ASSESSMENT CRITERION 3 
3. Surface area is accurately measured. 

ASSESSMENT CRITERION 4 
4. Job setting out is based on scale drawing. 

ASSESSMENT CRITERION 5 
5. Accurate calculations of required materials are made, taking into account material manufacturer specifications, material properties and work area size. 

SPECIFIC OUTCOME 2 
Develop a work plan. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Production rates are estimated for work activities. 

ASSESSMENT CRITERION 2 
2. Time durations for work activities are calculated. 

ASSESSMENT CRITERION 3 
3. A feasible work plan is developed. 


UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
Assessment of learner achievements takes place at providers accredited by CETA (RSA, 1998b) for the provision of programs that result in the outcomes specified. CETA is responsible for moderation of learner achievements of learners who meet the requirements of this unit standard. 

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
Qualifying learners understand and can explain:

1. Multiplication and division.
2. Material manufacturer specifications.
3. Surface area measurements and volumes of materials required.
4. Work plan components. 


Critical Cross-field Outcomes (CCFO): 

UNIT STANDARD CCFO IDENTIFYING 
Identify and solve problems

1. Calculate material quantities required.
2. Develop a work plan
  • Accurate calculations of materials are made, taking into account manufacturer specifications, material properties and work area size. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others

    1. Develop a work plan.
  • A feasible work plan is developed. 

  • UNIT STANDARD CCFO ORGANISING 
    Employ self management

    1. Develop a work plan.
  • Production rates are estimated for work activities.
  • Time durations for work activities are calculated.
  • A feasible work plan is developed. 

  • UNIT STANDARD CCFO COLLECTING 
    Manage information

    1. Develop a work plan.
  • Production rates are estimated for work activities.
  • Time durations for work activities are calculated. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively

    1. Develop a work plan.
  • Production rates are estimated for work activities.
  • Time durations for work activities are calculated.
  • A feasible work plan is developed. 

  • UNIT STANDARD CCFO SCIENCE 
    Understand Contextual world-systems

    1. Develop a work plan.
  • A feasible work plan is developed. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate scientific and technological competence

    1. Make calculations.
    2. Develop a work plan.
  • Accurate calculations are made, for both multiplication and division, with numbers of up to three digits.
  • Percentages are accurately computed.
  • Production rates are estimated for work activities.
  • Time durations for work activities are calculated.
  • A feasible work plan is developed. 

  • UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 261661, which is "Develop construction work plans", Level 3, 8 credits. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  20919   National Certificate: Construction Painting  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2009-03-12  Was CETA until Last Date for Achievement 
    Core  20814   National Certificate: Construction Plastering  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2009-03-12  Was CETA until Last Date for Achievement 
    Core  20815   National Certificate: Construction Tiling  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2009-03-12  Was CETA until Last Date for Achievement 
    Core  49080   National Certificate: Construction: Advanced Crane Operations  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Core  49081   National Certificate: Construction: Advanced Plant Operations  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Core  49016   National Certificate: Construction: Concreting  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Core  24173   National Certificate: Construction: Roadworks  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Core  24295   National Certificate: Timber Roof Erecting  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Elective  49410   National Certificate: Construction  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Elective  49012   National Certificate: Construction: Concrete Reinforcing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2009-05-13  Was CETA until Last Date for Achievement 
    Elective  49015   National Certificate: Construction: Structural Steel Erecting  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2009-05-13  Was CETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Academy for Construction Skills (Pty) Ltd (ACS) 
    2. Aveng Grinaker -LTA Civil Engineering 
    3. BOLAND COLLEGE (Paarl) 
    4. Bright Storm Projects 
    5. Certified Training Solutions (Pty) Ltd 
    6. CSTA Training Academy 
    7. EDUCATORY ELECTRO SERVICES 
    8. Goitsebasadi Construction Project 
    9. Ikemeleng Training and Development Services 
    10. imithetho labour law 
    11. In Touch Community Development & Project Managers 
    12. Isivuno HR and Solutions 
    13. Leps Training Consultants 
    14. Madzahisi College 
    15. Mahumani Empowerment Servives Centre 
    16. Masana Social Consultants cc 
    17. Motheo Academy PTY LTD 
    18. Othandweni Training Centre 
    19. PIONEER BUSINESS CONSULTING (PTY) LTD 
    20. Powerpro Technologies and Training Facility (PTY) LTD 
    21. Primeserv Corporate Solutions (Pty) Ltd 
    22. Pro Skills Development (Pty) Ltd 
    23. Protech Training (Pty) Ltd 
    24. Raubex Construction Pty (Ltd) 
    25. Regen Technical Institute Pty Ltd 
    26. Sakhisizwe Development Training 
    27. Sheq and Environmental Projects 
    28. Sonani Training and Communications 
    29. South African Value Education (Pty) Ltd 
    30. Thabomeleng 
    31. Tjeka Training Matters Pty Ltd 
    32. TOP PERFORMERS FOR AFRICA CC 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.