|
|
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |
| SOUTH AFRICAN QUALIFICATIONS AUTHORITY |
| REGISTERED UNIT STANDARD: |
| Apply quality principles on a construction site |
| SAQA US ID | UNIT STANDARD TITLE | |||
| 9986 | Apply quality principles on a construction site | |||
| ORIGINATOR | ||||
| SGB Building Construction | ||||
| PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY | ||||
| - | ||||
| FIELD | SUBFIELD | |||
| Field 12 - Physical Planning and Construction | Building Construction | |||
| ABET BAND | UNIT STANDARD TYPE | PRE-2009 NQF LEVEL | NQF LEVEL | CREDITS |
| Undefined | Regular | Level 2 | NQF Level 02 | 12 |
| REGISTRATION STATUS | REGISTRATION START DATE | REGISTRATION END DATE | SAQA DECISION NUMBER | |
| Reregistered | 2018-07-01 | 2023-06-30 | SAQA 06120/18 | |
| LAST DATE FOR ENROLMENT | LAST DATE FOR ACHIEVEMENT | |||
| 2024-06-30 | 2027-06-30 | |||
| In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise. |
This unit standard does not replace any other unit standard and is not replaced by any other unit standard. |
| PURPOSE OF THE UNIT STANDARD |
| The purpose of this Unit Standard is to enable Construction Contractors to manage quality, and to apply specifications on a construction project. |
| LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING |
| FETC NQF Level 2 literacy and numeracy competencies. |
| UNIT STANDARD RANGE |
| 1. Quality improvement principles include: the cost of non- conformance, the establishment of acceptable quality targets, conformance to requirements, and the reduction in defects.
2. Specifications include Standard and Project Specifications, including any corrections and amendments to the Standard Specifications. 3. Documents that contain specification information and quality requirements include: The standard specifications, project document, drawings, and information from the Client / Clients Representative. |
| Specific Outcomes and Assessment Criteria: |
| SPECIFIC OUTCOME 1 |
| Implement a Quality Improvement process. |
ASSESSMENT CRITERIA |
| ASSESSMENT CRITERION 1 |
| 1. Quality improvement principles are applied. |
| ASSESSMENT CRITERION 2 |
| 2. Work methods include quality specifications. |
| SPECIFIC OUTCOME 2 |
| Implement a Quality Control System. |
ASSESSMENT CRITERIA |
| ASSESSMENT CRITERION 1 |
| 1. Inspection procedures are implemented. |
| ASSESSMENT CRITERION 2 |
| 2. Testing and sampling procedures are established. |
| ASSESSMENT CRITERION 3 |
| 3. Process control testing procedures are implemented. |
| ASSESSMENT CRITERION 4 |
| 4. Acceptance control testing is complied with. |
| SPECIFIC OUTCOME 3 |
| Apply specifications on a project. |
ASSESSMENT CRITERIA |
| ASSESSMENT CRITERION 1 |
| 1. Specifications are applied in the method of all work activities. |
| ASSESSMENT CRITERION 2 |
| 2. Information in the specification documents are accessed correctly. |
| ASSESSMENT CRITERION 3 |
| 3. Resource procurement is performed according to specifications. |
| UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS |
| Assessment of learner achievements takes place at providers accredited by CETA (RSA, 1998b) for the provision of programs that result in the outcomes specified for the Certificate in Construction Contracting. CETA is responsible for moderation of learner achievements of learners who meet the requirements of this unit standard. |
| UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE |
| Qualifying learners understand and can explain:
1. Contract documents that contain quality and specification information. 2. Procedures in complying with "end-product" acceptance control testing. 3. The implications of non-compliance with quality requirements. 4. Procedures in establishing process control systems. |
| Critical Cross-field Outcomes (CCFO): |
| UNIT STANDARD CCFO IDENTIFYING |
| Identify and solve problems
1. Implement a Quality Improvement process. |
| UNIT STANDARD CCFO WORKING |
| Work effectively with others
1. Implement a Quality Control System. |
| UNIT STANDARD CCFO ORGANISING |
| Employ self management
1. Implement a Quality Improvement process. |
| UNIT STANDARD CCFO COLLECTING |
| Manage information
1. Implement a Quality Control System. 2. Apply specifications on a project. |
| UNIT STANDARD CCFO COMMUNICATING |
| Communicate effectively
1. Implement a Quality Control System. |
| UNIT STANDARD CCFO SCIENCE |
| Understand Contextual world-systems
1. Implement a Quality Improvement process. |
| UNIT STANDARD CCFO DEMONSTRATING |
| Demonstrate scientific and technological competence
1. Implement a Quality Improvement process. 2. Implement a Quality Control System. 3. Apply specifications on a project. |
REREGISTRATION HISTORY |
| As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. |
| QUALIFICATIONS UTILISING THIS UNIT STANDARD: |
| ID | QUALIFICATION TITLE | PRE-2009 NQF LEVEL | NQF LEVEL | STATUS | END DATE | PRIMARY OR DELEGATED QA FUNCTIONARY | |
| Core | 49410 | National Certificate: Construction | Level 2 | NQF Level 02 | Reregistered | 2023-06-30 | CETA |
| Core | 20813 | National Certificate: Construction Contracting | Level 2 | NQF Level 02 | Reregistered | 2023-06-30 | CETA |
| Core | 65789 | National Certificate: Construction Plant Operations | Level 2 | NQF Level 02 | Reregistered | 2023-06-30 | CETA |
| Core | 48961 | National Certificate: Construction: Crane Operations | Level 2 | NQF Level 02 | Reregistered | 2023-06-30 | CETA |
| Core | 48940 | National Certificate: Construction: Plant Operations | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2012-06-30 | CETA |
| Core | 49016 | National Certificate: Construction: Concreting | Level 3 | NQF Level 03 | Reregistered | 2023-06-30 | CETA |
| Core | 49602 | National Certificate: Construction: Geotechnical | Level 3 | NQF Level 03 | Reregistered | 2023-06-30 | CETA |
| Core | 24173 | National Certificate: Construction: Roadworks | Level 3 | NQF Level 03 | Reregistered | 2023-06-30 | CETA |
| Core | 49015 | National Certificate: Construction: Structural Steel Erecting | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2009-05-13 | Was CETA until Last Date for Achievement |
| Elective | 49411 | General Education and Training Certificate: Construction | Level 1 | NQF Level 01 | Reregistered | 2023-06-30 | CETA |
| Elective | 61689 | National Certificate: Community Water, Health and Sanitation Promotion | Level 2 | NQF Level 02 | Reregistered | 2023-06-30 | EWSETA |
| Elective | 24133 | National Certificate: Construction: Roadworks | Level 2 | NQF Level 02 | Reregistered | 2023-06-30 | CETA |
| Elective | 96402 | National Certificate: Hot Water System Installation | Level 2 | NQF Level 02 | Reregistered | 2023-06-30 | As per Learning Programmes recorded against this Qual |
| Elective | 65709 | National Certificate: Construction: Steelwork | Level 3 | NQF Level 03 | Reregistered | 2023-06-30 | CETA |
| PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: |
| This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here. |
| 1. | ALL CONNECTIONS TRAINING AND CONSTRUCTION (PTY) LTD |
| 2. | ERGO MAPHELONG INSTITUTE (PTY) LTD |
| 3. | ESKOM DISTRIBUTION - BEACON BAY |
| 4. | ESKOM GENERATION - PALMIET PUMP STORAGE GRABOUW |
| 5. | ESKOM KOEBERG - EE - GENERATION & TRADE TEST CENTRE |
| 6. | ESKOM KOEBERG POWER STATION - MC&I TRADE TEST CENTRE |
| 7. | ETHEKWININ MUNICIPALITY- SEACOW LAKE |
| 8. | FOREK INSTITUTE OF TECHNOLOGY |
| 9. | GG SQUARED PROJECTS |
| 10. | KHOSITHI TRAINING |
| 11. | LERONSA TRADING ENTERPRISE |
| 12. | MARULENG TRAINING ACADEMY |
| 13. | Mavco Engineering |
| 14. | MTL Training and Projects |
| 15. | NTANDOKAZI HOLDINGS (PTY) LTD |
| 16. | NTLEMO PROJECTS |
| 17. | P.MAB MANAGERS AND PROJECTS (PTY) LTD |
| 18. | PAULINE MATHLAELA & ASSOCIATES |
| 19. | POWER SYSTEMS TRAINING, CAPE TOWN |
| 20. | Protech Training (Pty) Ltd |
| 21. | PROTECH TRAINING JET PARK |
| 22. | TECHNICAL INTEGRATED SOLUTIONS (PTY) LTD |
| 23. | TSHWANE LEADERSHIP AND MANAGEMENT ACADEMY (PREMOS) |
| All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |